ASR 1000 with 4M routes support

[ctychan]

For ASR1000 to support 4M routes, RP2 must be used.  Does anyone know

1) RP2 need to have 16GB memory in order to support 4M routes?

2) Need to use ESP20/40 together with RP2?

3) If RP2 + ESP10, supporting route table size down to 1M?

4) 4M routes is shared for both IPv4 an IPv6?

5) SIP card will affect route table size?

[paolo bevilacqua]

Have you spoken about your pre-sales Cisco System Engineer before ?