Alright, I might be crazy, but this is driving me nuts! I am trying to upgrade the IOS on a new ASR1002 and it keeps failing! I have my laptop directly connected to the Gi0/0/0 interface and I have no firewall turned on. Below are the details:
Gi0/0/0
ip address 172.22.22.1 255.255.255.0
no shut
My laptop
ip add 172.22.22.2 255.255.255.0
default gateway set to 172.22.22.1
I can ping the ASR from my laptop and I can ping my laptop from the ASR.
WDC2-WAN-ASR-2#
WDC2-WAN-ASR-2#
WDC2-WAN-ASR-2#ping 172.22.22.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.22.22.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
WDC2-WAN-ASR-2#copy tftp: bootflash:
Address or name of remote host [172.22.22.2]?
Source filename [asr1000rp1-advipservicesk9.03.06.02.S.152-2.S2.bin]?
Destination filename [asr1000rp1-advipservicesk9.03.06.02.S.152-2.S2.bin]?
Accessing tftp://172.22.22.2/asr1000rp1-advipservicesk9.03.06.02.S.152-2.S2.bin...
%Error opening tftp://172.22.22.2/asr1000rp1-advipservicesk9.03.06.02.S.152-2.S2.bin (Timed out)
WDC2-WAN-ASR-2#
I have tried two different TFTP programs with no luck. I have the file in the correct directory, as well. I also don't see any requests on my TFTP server when this is happening, so for some reason it seems like it isn't making the request.
Any ideas?