cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
735
Views
5
Helpful
3
Replies

ASR 1002-x / QOS Issue

ammar-taha
Level 1
Level 1

Hello 

 

I run QOS to police youtube traffic and use cbQosCMPrePolicyBitRate (1.3.6.1.4.1.9.9.166.1.15.1.1.11.)  OID to monitor the amount of youtube traffic in PRTG software , the issue is when the traffic Exceed 4300 Mbps the router stop send the right policy-map value it send random numbers this issue happen to all my routers ,when i check it inside the router using 

show policy-map interface 

 

it show the right value but it send wrong one over SNMP 

3 Replies 3

marce1000
VIP
VIP

 

         - Check current software version on your ASA, use an advisory release if applicable  , check if that helps.

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Hello dear 

 

thank you for your reply , it's ASR not ASA and this issue happen on 4 routers with different software version

 

 

          - Same advice still applicable.

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '
Review Cisco Networking for a $25 gift card