BGP - default route origination from secondary site
I would like someone smarter than me to look at this config and let me know if it will work. In the example, Memphis is the home office, and when up and working, the Memphis WAN router originates the default route to the MPLS network:
int s2/0.100 point-to-point
ip addr 22.214.171.124 255.255.255.252
router bgp 845
neighbor 126.96.36.199 remote-as 65000
neighbor 188.8.131.52 default-originate
The secondary site, New York, must be able to accept the default origination when Memphis is up, but then NY must originate the default route if/when Memphis goes down. I have that configured as follows:
Hello guys.I installed remote access VPN on Windows 2019. I need to do additional configuration on the router to allow access outside. I got this.Public IP--------------ISP Router-------------Fa0/0 Cisco Router Fa0/1------------------------My Server ...
Meet the Authors video - How to Troubleshoot Network Problems with Vinit Jain
(Live event – Wednesday, February 12th, 2020 at 10:00 a.m. Pacific / 1:00 p.m. Eastern / 7:00 p.m. Paris)
This event had place on Wednesday 12th, February 2020 at 10hrs PDT&nbs...
I have a pair of 3945 routers that are proving to be underpowered for the 100+ remote offices connecting to them. Fortunately I happen to have a couple of 4351 ISRs rated for significantly greater encrypted throughput. Is there any way I could upgrade the...
This article assumes you have the basic knowledge and experience with Cisco DNA Center and Identity Services Engine (ISE).Note when reading this doc the "Authentication Policy" referred to is part of Cisco DNA Center Onboarding section and ha...