I would like to query about the bgp load sharing between iBGP & eBGP. We have two sites which are connected to MPLS cloud. one site has two routers in iBGP to each other with active/backup ( put as-path prepend for backup ). These two sites are connected to Local DC sites via domestic link. Local DC sites also two routers. The other sites has 4 routers running iBGP between each other. Please see in attach for network diagram. I would like to know following things as possible.
1) Load sharing between AS 100 & AS 300, and also between AS 200 & AS 300. Loadsharing for EBGP.
2) Running GLBP with singel next hop device.So from AS 300 LAN, the virtual gateway never change until clear arp-cache in router
3) Load sharing between AS 200 iBGP routers for site B.
Cisco recently announced availability of the latest release on the IOS-XE train IOS-XE 17.6.1. This release is the newest Extended Maintenance release on the Catalyst 9000 platforms, which will be supported for lifetime of 36 months. The EMR release would...
1-In single area, the routers have the Link State Database, having the same LSDB helps the routers to build a loop-free topology.2-Now in a multiarea topology, the ABRs are responsible for advertising an intra area route into another area as an inter-area...
Community Live-Application Hosting on ISR, ASR, CSR and Catalyst Routing Platforms
This event will have place on Tuesday 17th, August 2021 at 10:00 hrs PDT
Learn about Cisco’s ISR Fixed Platforms and how it fits into Cisco’s overall Branc...
To optimize the database description (DBD) packet exchange between two OSPF neighbors, use the compatible rfc5243 in router configuration mode or address family configuration mode for OSPFv3 AF. To disable RFC5243 optimization, use the no form of this com...
We said always that OSPF is a link-state routing protocol.For most engineer stuying CCNA or CCNP, OSPF is misunsdertanding.In reality, OSPF is a link-state routing protocol only within an area (intra-area); but almost a distance-vector routing protocol be...