04-23-2019 04:32 AM
Hello Guys,
I'm facing a issue with PE-CE routing in BGP.
On PE router my bgp neighborship it's showing IDLE and on CE router everything is fine , apart from this my routes are not advertised from one PE router to another PE router. Need Help.
PE-1 Router:
#do show run | s bgp
router bgp 100
no synchronization
bgp router-id 22.2.2.2
bgp log-neighbor-changes
neighbor 3.3.3.3 remote-as 100
neighbor 3.3.3.3 update-source Loopback1
neighbor 3.3.3.3 next-hop-self
neighbor 4.4.4.4 remote-as 100
neighbor 4.4.4.4 update-source Loopback1
neighbor 4.4.4.4 send-community extended
neighbor 10.0.12.1 remote-as 1
no auto-summary
!
address-family vpnv4
neighbor 4.4.4.4 activate
neighbor 4.4.4.4 send-community both
exit-address-family
!
address-family ipv4 vrf abc
no synchronization
neighbor 10.0.12.1 remote-as 1
neighbor 10.0.12.1 activate
exit-address-family
R2(config)#Do show run | s vrf
ip vrf abc
rd 100:1
route-target export 100:1
route-target import 100:1
ip vrf forwarding abc
address-family ipv4 vrf abc
no synchronization
neighbor 10.0.12.1 remote-as 1
neighbor 10.0.12.1 activate
R2(config)#
CE-1 Router:
show run | s bgp
router bgp 1
no synchronization
bgp log-neighbor-changes
network 1.1.1.1 mask 255.255.255.255
neighbor 10.0.12.2 remote-as 100
no auto-summary
R1#
and neighborship between PE-PE router through VPNv4 is fine.
04-23-2019 04:39 AM
Please include scenario diagram and detailed config .
04-23-2019 04:55 AM
@SyedAdnan2643 hello,
Could you try set is on CE?
neighbor 10.0.12.2 ebgp-multihop 2
04-23-2019 05:44 AM
Hello
Do you have NLRI Between the PE/CE is 10.0.12.x
ping 10.0.12.x source 10.0.12.y
sh ip route 10.0.12.x
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide