ā05-01-2012 07:17 AM - edited ā03-04-2019 04:13 PM
Hi Experts
kindly see attached
I have seen a Ciscopress routing video , i notice that the WAN Links towards BB1 and BB2 Represents the ISPs are advertised in BGP,is that possible?when we need this type of setup?i think its wrong setuppls clear my confusion
thanks
jamil
ā05-01-2012 07:45 AM
Jamil,
This setup is fine. Router R1 is advertising the subnet that's peering with the ISP. The ISP can advertise this as well instead of the "customer". The problem that you'll see is a RIB-failure if both sides are advertising the same network because R1 would see the advertised route and inferior to the locally connected route. Otherwise, if the ISP is not advertising that space, then R1 should advertise it so others will know how to get to your internal networks: the loopback in this case.
HTH,
John
ā05-01-2012 07:59 AM
Hi John
thanks for ur reply
but i haven't see this setup ever , this is not real world scenario
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide