cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1656
Views
10
Helpful
26
Replies

BGP reachability issue from different AS

R Manjunatha
Level 3
Level 3

Unable to ping from one AS 65001 i.e R61 to another AS 65002 R54, R53 and R58.similarly AS65003 R59, R50 and R55.but am getting all the BGP routes. I configured next hop self towards ebgp routers as well.

ex- from R61 unable to ping IP add 192.54.10.1 and 192.55.10.1

 R61

interface Loopback0
ip address 61.61.61.61 255.255.255.0
!
interface Loopback1
ip address 192.61.10.1 255.255.255.0
!
interface Loopback2
ip address 192.61.20.2 255.255.255.0
!
interface Loopback3
ip address 192.61.30.3 255.255.255.0
!
interface Loopback4
ip address 192.61.40.4 255.255.255.0
!
interface Ethernet0/0
ip address 10.10.61.2 255.255.255.0
duplex auto
!
interface Ethernet0/1
no ip address
duplex auto
!
interface Ethernet0/2
ip address 172.16.85.2 255.255.255.0
duplex auto
!
interface Ethernet0/3
no ip address
shutdown
duplex auto
!
interface Ethernet1/0
no ip address
shutdown
duplex auto
!
interface Ethernet1/1
no ip address
shutdown
duplex auto
!
interface Ethernet1/2
no ip address
shutdown
duplex auto
!
interface Ethernet1/3
no ip address
shutdown
duplex auto
!
!
router eigrp 100
network 172.16.85.0 0.0.0.255
!
router ospf 1
router-id 61.61.61.61
network 10.10.48.0 0.0.0.255 area 0
network 10.10.61.0 0.0.0.255 area 0
network 61.61.61.0 0.0.0.255 area 0
!
router bgp 65002
bgp log-neighbor-changes
network 61.61.61.0 mask 255.255.255.0
network 172.16.85.0 mask 255.255.255.0
network 192.61.10.0
network 192.61.20.0
network 192.61.30.0
network 192.61.40.0
neighbor 48.48.48.48 remote-as 65002
neighbor 48.48.48.48 update-source Loopback0
neighbor 48.48.48.48 next-hop-self
neighbor 52.52.52.52 remote-as 65002
neighbor 52.52.52.52 update-source Loopback0
neighbor 52.52.52.52 next-hop-self
neighbor 60.60.60.60 remote-as 65002
neighbor 60.60.60.60 update-source Loopback0
neighbor 60.60.60.60 next-hop-self

R61(config-router)# DO SH IP BGP
BGP table version is 68, local router ID is 192.61.40.4
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter,
x best-external, a additional-path, c RIB-compressed,
t secondary path,
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found

Network Next Hop Metric LocPrf Weight Path
*>i 10.10.49.0/24 48.48.48.48 0 100 0 65001 i
*>i 10.10.54.0/24 48.48.48.48 0 100 0 65001 i
*>i 48.48.48.0/24 48.48.48.48 0 100 0 i
*>i 49.49.49.0/24 48.48.48.48 0 100 0 65001 i
*> 61.61.61.0/24 0.0.0.0 0 32768 i
*>i 172.16.1.0/24 52.52.52.52 0 100 0 i
*>i 172.16.2.0/24 48.48.48.48 0 100 0 i
*>i 172.16.3.0/24 52.52.52.52 0 100 0 65003 i
*> 172.16.85.0/24 0.0.0.0 0 32768 i
*>i 192.48.10.0 48.48.48.48 0 100 0 i
*>i 192.48.20.0 48.48.48.48 0 100 0 i
*>i 192.48.30.0 48.48.48.48 0 100 0 i
*>i 192.48.40.0 48.48.48.48 0 100 0 i
Network Next Hop Metric LocPrf Weight Path
*>i 192.49.10.0 48.48.48.48 0 100 0 65001 i
*>i 192.49.20.0 48.48.48.48 0 100 0 65001 i
*>i 192.49.30.0 48.48.48.48 0 100 0 65001 i
*>i 192.49.40.0 48.48.48.48 0 100 0 65001 i
*>i 192.50.10.0 52.52.52.52 0 100 0 65003 i
*>i 192.50.20.0 52.52.52.52 0 100 0 65003 i
*>i 192.50.30.0 52.52.52.52 0 100 0 65003 i
*>i 192.50.40.0 52.52.52.52 0 100 0 65003 i
*>i 192.52.10.0 52.52.52.52 0 100 0 i
*>i 192.52.20.0 52.52.52.52 0 100 0 i
*>i 192.52.30.0 52.52.52.52 0 100 0 i
*>i 192.52.40.0 52.52.52.52 0 100 0 i
*>i 192.53.10.0 52.52.52.52 0 100 0 65003 65001 i
*>i 192.53.20.0 52.52.52.52 0 100 0 65003 65001 i
*>i 192.53.30.0 52.52.52.52 0 100 0 65003 65001 i
*>i 192.53.40.0 52.52.52.52 0 100 0 65003 65001 i
*>i 192.54.10.0 48.48.48.48 0 100 0 65001 i
*>i 192.54.20.0 48.48.48.48 0 100 0 65001 i
*>i 192.54.30.0 48.48.48.48 0 100 0 65001 i
*>i 192.54.40.0 48.48.48.48 0 100 0 65001 i
*>i 192.55.10.0 52.52.52.52 0 100 0 65003 i
*>i 192.55.20.0 52.52.52.52 0 100 0 65003 i
Network Next Hop Metric LocPrf Weight Path
*>i 192.55.30.0 52.52.52.52 0 100 0 65003 i
*>i 192.55.40.0 52.52.52.52 0 100 0 65003 i
*>i 192.56.10.0 52.52.52.52 0 100 0 65003 i
*>i 192.56.20.0 52.52.52.52 0 100 0 65003 i
*>i 192.56.30.0 52.52.52.52 0 100 0 65003 i
*>i 192.56.40.0 52.52.52.52 0 100 0 65003 i
*>i 192.58.10.0 48.48.48.48 0 100 0 65001 i
*>i 192.58.20.0 48.48.48.48 0 100 0 65001 i
*>i 192.58.30.0 48.48.48.48 0 100 0 65001 i
*>i 192.58.40.0 48.48.48.48 0 100 0 65001 i
*>i 192.59.10.0 52.52.52.52 0 100 0 65003 i
*>i 192.59.20.0 52.52.52.52 0 100 0 65003 i
*>i 192.59.30.0 52.52.52.52 0 100 0 65003 i
*>i 192.59.40.0 52.52.52.52 0 100 0 65003 i
*>i 192.60.10.0 60.60.60.60 0 100 0 i
*>i 192.60.20.0 60.60.60.60 0 100 0 i
*>i 192.60.30.0 60.60.60.60 0 100 0 i
*>i 192.60.40.0 60.60.60.60 0 100 0 i
*> 192.61.10.0 0.0.0.0 0 32768 i
*> 192.61.20.0 0.0.0.0 0 32768 i
*> 192.61.30.0 0.0.0.0 0 32768 i
*> 192.61.40.0 0.0.0.0 0 32768 i
Network Next Hop Metric LocPrf Weight Path
*>i 192.168.50.0 60.60.60.60 0 100 0 i
R61(config-router)#

R61(config-router)#DO sh ip rou bgp
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
a - application route
+ - replicated route, % - next hop override, p - overrides from PfR

Gateway of last resort is not set

10.0.0.0/8 is variably subnetted, 7 subnets, 2 masks
B 10.10.49.0/24 [200/0] via 48.48.48.48, 00:53:58
B 10.10.54.0/24 [200/0] via 48.48.48.48, 00:53:38
48.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
B 48.48.48.0/24 [200/0] via 48.48.48.48, 00:05:29
49.0.0.0/24 is subnetted, 1 subnets
B 49.49.49.0 [200/0] via 48.48.48.48, 00:03:57
172.16.0.0/16 is variably subnetted, 5 subnets, 2 masks
B 172.16.1.0/24 [200/0] via 52.52.52.52, 00:53:58
B 172.16.2.0/24 [200/0] via 48.48.48.48, 00:53:58
B 172.16.3.0/24 [200/0] via 52.52.52.52, 00:53:58
B 192.48.10.0/24 [200/0] via 48.48.48.48, 00:53:58
B 192.48.20.0/24 [200/0] via 48.48.48.48, 00:53:58
B 192.48.30.0/24 [200/0] via 48.48.48.48, 00:53:58
B 192.48.40.0/24 [200/0] via 48.48.48.48, 00:53:58
B 192.49.10.0/24 [200/0] via 48.48.48.48, 00:53:58
B 192.49.20.0/24 [200/0] via 48.48.48.48, 00:53:58
B 192.49.30.0/24 [200/0] via 48.48.48.48, 00:53:58
B 192.49.40.0/24 [200/0] via 48.48.48.48, 00:53:58
B 192.50.10.0/24 [200/0] via 52.52.52.52, 00:53:45
B 192.50.20.0/24 [200/0] via 52.52.52.52, 00:53:45
B 192.50.30.0/24 [200/0] via 52.52.52.52, 00:53:45
B 192.50.40.0/24 [200/0] via 52.52.52.52, 00:53:45
B 192.52.10.0/24 [200/0] via 52.52.52.52, 00:53:58
B 192.52.20.0/24 [200/0] via 52.52.52.52, 00:53:58
B 192.52.30.0/24 [200/0] via 52.52.52.52, 00:53:58
B 192.52.40.0/24 [200/0] via 52.52.52.52, 00:53:58
B 192.53.10.0/24 [200/0] via 52.52.52.52, 00:53:45
B 192.53.20.0/24 [200/0] via 52.52.52.52, 00:53:45
B 192.53.30.0/24 [200/0] via 52.52.52.52, 00:53:45
B 192.53.40.0/24 [200/0] via 52.52.52.52, 00:53:45
B 192.54.10.0/24 [200/0] via 48.48.48.48, 00:53:38
B 192.54.20.0/24 [200/0] via 48.48.48.48, 00:53:38
B 192.54.30.0/24 [200/0] via 48.48.48.48, 00:53:38
B 192.54.40.0/24 [200/0] via 48.48.48.48, 00:53:38
B 192.55.10.0/24 [200/0] via 52.52.52.52, 00:53:45
B 192.55.20.0/24 [200/0] via 52.52.52.52, 00:53:45
B 192.55.30.0/24 [200/0] via 52.52.52.52, 00:53:45
B 192.55.40.0/24 [200/0] via 52.52.52.52, 00:53:45
B 192.56.10.0/24 [200/0] via 52.52.52.52, 00:53:58
B 192.56.20.0/24 [200/0] via 52.52.52.52, 00:53:58
B 192.56.30.0/24 [200/0] via 52.52.52.52, 00:53:58
B 192.56.40.0/24 [200/0] via 52.52.52.52, 00:53:58
B 192.58.10.0/24 [200/0] via 48.48.48.48, 00:53:58
B 192.58.20.0/24 [200/0] via 48.48.48.48, 00:53:58
B 192.58.30.0/24 [200/0] via 48.48.48.48, 00:53:58
B 192.58.40.0/24 [200/0] via 48.48.48.48, 00:53:58
B 192.59.10.0/24 [200/0] via 52.52.52.52, 00:53:58
B 192.59.20.0/24 [200/0] via 52.52.52.52, 00:53:58
B 192.59.30.0/24 [200/0] via 52.52.52.52, 00:53:58
B 192.59.40.0/24 [200/0] via 52.52.52.52, 00:53:58
B 192.60.10.0/24 [200/0] via 60.60.60.60, 00:53:58
B 192.60.20.0/24 [200/0] via 60.60.60.60, 00:53:58
B 192.60.30.0/24 [200/0] via 60.60.60.60, 00:53:58
B 192.60.40.0/24 [200/0] via 60.60.60.60, 00:53:58
B 192.168.50.0/24 [200/0] via 60.60.60.60, 00:53:58

R48

interface Loopback0
ip address 48.48.48.48 255.255.255.0
!
interface Loopback1
ip address 192.48.10.1 255.255.255.0
!
interface Loopback2
ip address 192.48.20.2 255.255.255.0
!
interface Loopback3
ip address 192.48.30.3 255.255.255.0
!
interface Loopback4
ip address 192.48.40.4 255.255.255.0
!
interface Ethernet0/0
no ip address
shutdown
duplex auto
!
interface Ethernet0/1
ip address 10.10.48.1 255.255.255.0
duplex auto
!
interface Ethernet0/2
ip address 10.10.61.1 255.255.255.0
duplex auto
!
interface Ethernet0/3
ip address 172.16.2.1 255.255.255.0
duplex auto
!
interface Ethernet1/0
no ip address
shutdown
duplex auto
!
interface Ethernet1/1
no ip address
shutdown
duplex auto
!
interface Ethernet1/2
no ip address
shutdown
duplex auto
!
interface Ethernet1/3
no ip address
shutdown
duplex auto
!
router ospf 1
router-id 48.48.48.48
network 10.10.48.0 0.0.0.255 area 0
network 10.10.61.0 0.0.0.255 area 0
network 48.48.48.0 0.0.0.255 area 0
!
router bgp 65002
bgp log-neighbor-changes
network 48.48.48.0 mask 255.255.255.0
network 172.16.2.0 mask 255.255.255.0
network 192.48.10.0
network 192.48.20.0
network 192.48.30.0
network 192.48.40.0
neighbor 52.52.52.52 remote-as 65002
neighbor 52.52.52.52 update-source Loopback0
neighbor 52.52.52.52 next-hop-self
neighbor 60.60.60.60 remote-as 65002
neighbor 60.60.60.60 update-source Loopback0
neighbor 60.60.60.60 next-hop-self
neighbor 61.61.61.61 remote-as 65002
neighbor 61.61.61.61 update-source Loopback0
neighbor 61.61.61.61 next-hop-self
neighbor 172.16.2.2 remote-as 65001

R49

interface Loopback0
ip address 49.49.49.49 255.255.255.0
!
interface Loopback1
ip address 192.49.10.1 255.255.255.0
!
interface Loopback2
ip address 192.49.20.2 255.255.255.0
!
interface Loopback3
ip address 192.49.30.3 255.255.255.0
!
interface Loopback4
ip address 192.49.40.4 255.255.255.0
!
interface Ethernet0/0
ip address 10.10.49.2 255.255.255.0
duplex auto
!
interface Ethernet0/1
ip address 10.10.58.1 255.255.255.0
duplex auto
!
interface Ethernet0/2
ip address 172.16.2.2 255.255.255.0
duplex auto
!
interface Ethernet0/3
no ip address
shutdown
duplex auto
!
interface Ethernet1/0
no ip address
shutdown
duplex auto
!
interface Ethernet1/1
no ip address
shutdown
duplex auto
!
interface Ethernet1/2
no ip address
shutdown
duplex auto
!
interface Ethernet1/3
no ip address
shutdown
duplex auto
!
router ospf 1
router-id 49.49.49.49
network 10.10.49.0 0.0.0.255 area 0
network 10.10.58.0 0.0.0.255 area 0
network 49.49.49.0 0.0.0.255 area 0
!
router bgp 65001
bgp log-neighbor-changes
network 49.49.49.0 mask 255.255.255.0
network 172.16.2.0 mask 255.255.255.0
network 192.49.10.0
network 192.49.20.0
network 192.49.30.0
network 192.49.40.0
neighbor 53.53.53.53 remote-as 65001
neighbor 53.53.53.53 update-source Loopback0
neighbor 53.53.53.53 next-hop-self
neighbor 54.54.54.54 remote-as 65001
neighbor 54.54.54.54 update-source Loopback0
neighbor 54.54.54.54 next-hop-self
neighbor 58.58.58.58 remote-as 65001
neighbor 58.58.58.58 update-source Loopback0
neighbor 58.58.58.58 next-hop-self
neighbor 172.16.2.1 remote-as 65002




R54

interface Loopback0
ip address 54.54.54.54 255.255.255.0
!
interface Loopback1
ip address 192.54.10.1 255.255.255.0
!
interface Loopback2
ip address 192.54.20.2 255.255.255.0
!
interface Loopback3
ip address 192.54.30.3 255.255.255.0
!
interface Loopback4
ip address 192.54.40.4 255.255.255.0
!
interface Ethernet0/0
ip address 10.10.54.1 255.255.255.0
duplex auto
!
interface Ethernet0/1
ip address 10.10.49.1 255.255.255.0
duplex auto
!
interface Ethernet0/2
no ip address
shutdown
duplex auto
!
interface Ethernet0/3
no ip address
shutdown
duplex auto
!
interface Ethernet1/0
no ip address
shutdown
duplex auto
!
interface Ethernet1/1
no ip address
shutdown
duplex auto
!
interface Ethernet1/2
no ip address
shutdown
duplex auto
!
interface Ethernet1/3
no ip address
shutdown
duplex auto
!
router ospf 1
router-id 54.54.54.54
network 10.10.49.0 0.0.0.255 area 0
network 10.10.54.0 0.0.0.255 area 0
network 54.54.54.0 0.0.0.255 area 0
!
router bgp 65001
bgp log-neighbor-changes
network 10.10.49.0 mask 255.255.255.0
network 10.10.54.0 mask 255.255.255.0
network 192.54.10.0
network 192.54.20.0
network 192.54.30.0
network 192.54.40.0
neighbor 49.49.49.49 remote-as 65001
neighbor 49.49.49.49 update-source Loopback0
neighbor 49.49.49.49 next-hop-self
neighbor 53.53.53.53 remote-as 65001
neighbor 53.53.53.53 update-source Loopback0
neighbor 53.53.53.53 next-hop-self
neighbor 58.58.58.58 remote-as 65001
neighbor 58.58.58.58 update-source Loopback0
neighbor 58.58.58.58 next-hop-self

R53

interface Loopback0
ip address 53.53.53.53 255.255.255.0
!
interface Loopback1
ip address 192.53.10.1 255.255.255.0
!
interface Loopback2
ip address 192.53.20.2 255.255.255.0
!
interface Loopback3
ip address 192.53.30.3 255.255.255.0
!
interface Loopback4
ip address 192.53.40.4 255.255.255.0
!
interface Ethernet0/0
ip address 10.10.54.2 255.255.255.0
duplex auto
!
interface Ethernet0/1
ip address 10.10.53.2 255.255.255.0
duplex auto
!
interface Ethernet0/2
no ip address
shutdown
duplex auto
!
interface Ethernet0/3
no ip address
shutdown
duplex auto
!
interface Ethernet1/0
no ip address
shutdown
duplex auto
!
interface Ethernet1/1
no ip address
shutdown
duplex auto
!
interface Ethernet1/2
no ip address
shutdown
duplex auto
!
interface Ethernet1/3
no ip address
shutdown
duplex auto
!
router ospf 1
router-id 53.53.53.53
network 10.10.53.0 0.0.0.255 area 0
network 10.10.54.0 0.0.0.255 area 0
network 53.53.53.0 0.0.0.255 area 0
!
router bgp 65001
bgp log-neighbor-changes
network 192.53.10.0
network 192.53.20.0
network 192.53.30.0
network 192.53.40.0
network 192.54.10.0
network 192.54.20.0
network 192.54.30.0
network 192.54.40.0
neighbor 54.54.54.54 remote-as 65001
neighbor 54.54.54.54 update-source Loopback0
neighbor 58.58.58.58 remote-as 65001
neighbor 58.58.58.58 update-source Loopback0
!

 

 

1 Accepted Solution

Accepted Solutions

Hi @R Manjunatha ,

You need to add the following command on R61 to make sure ibgp learnt routes will be redistributed in eigrp:

 

router bgp 65002

bgp redistribute-internal

 

Regards,

Harold Ritter
Sr Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México

View solution in original post

26 Replies 26

R Manjunatha
Level 3
Level 3

I have attached the topology for your reference 

friend 
go to destination router, do

show ip route

check if the source router LO is learn
if it learn then 
use 


ping x.x.x.x source y.y.y.y


this is BGP not ospf or eigrp. 

This is destination R53 router

show ip route

and source R53 as per the topology.

 Do I need to advertise loopback 0 IP address in BGP routes in all the routers?

R53 destination

R53# sh ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
a - application route
+ - replicated route, % - next hop override, p - overrides from PfR

Gateway of last resort is not set

10.0.0.0/8 is variably subnetted, 6 subnets, 2 masks
O 10.10.49.0/24 [110/20] via 10.10.54.1, 01:43:34, Ethernet0/0
C 10.10.53.0/24 is directly connected, Ethernet0/1
L 10.10.53.2/32 is directly connected, Ethernet0/1
C 10.10.54.0/24 is directly connected, Ethernet0/0
L 10.10.54.2/32 is directly connected, Ethernet0/0
O 10.10.58.0/24 [110/20] via 10.10.53.1, 01:43:24, Ethernet0/1
49.0.0.0/32 is subnetted, 1 subnets
O 49.49.49.49 [110/21] via 10.10.54.1, 01:43:24, Ethernet0/0
[110/21] via 10.10.53.1, 01:43:24, Ethernet0/1
53.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C 53.53.53.0/24 is directly connected, Loopback0
L 53.53.53.53/32 is directly connected, Loopback0
54.0.0.0/32 is subnetted, 1 subnets
O 54.54.54.54 [110/11] via 10.10.54.1, 01:43:34, Ethernet0/0
58.0.0.0/32 is subnetted, 1 subnets
O 58.58.58.58 [110/11] via 10.10.53.1, 01:43:24, Ethernet0/1
172.16.0.0/24 is subnetted, 2 subnets
B 172.16.1.0 [200/0] via 58.58.58.58, 01:42:21
B 172.16.3.0 [200/0] via 58.58.58.58, 01:42:40
B 192.50.10.0/24 [200/0] via 58.58.58.58, 01:42:21
B 192.50.20.0/24 [200/0] via 58.58.58.58, 01:42:21
B 192.50.30.0/24 [200/0] via 58.58.58.58, 01:42:21
B 192.50.40.0/24 [200/0] via 58.58.58.58, 01:42:21
192.53.10.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.53.10.0/24 is directly connected, Loopback1
L 192.53.10.1/32 is directly connected, Loopback1
192.53.20.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.53.20.0/24 is directly connected, Loopback2
L 192.53.20.2/32 is directly connected, Loopback2
192.53.30.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.53.30.0/24 is directly connected, Loopback3
L 192.53.30.3/32 is directly connected, Loopback3
192.53.40.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.53.40.0/24 is directly connected, Loopback4
L 192.53.40.4/32 is directly connected, Loopback4
B 192.54.10.0/24 [200/0] via 54.54.54.54, 01:42:40
B 192.54.20.0/24 [200/0] via 54.54.54.54, 01:42:40
B 192.54.30.0/24 [200/0] via 54.54.54.54, 01:42:40
B 192.54.40.0/24 [200/0] via 54.54.54.54, 01:42:40
B 192.55.10.0/24 [200/0] via 58.58.58.58, 01:41:50
B 192.55.20.0/24 [200/0] via 58.58.58.58, 01:41:50
B 192.55.30.0/24 [200/0] via 58.58.58.58, 01:41:50
B 192.55.40.0/24 [200/0] via 58.58.58.58, 01:41:50
B 192.56.10.0/24 [200/0] via 58.58.58.58, 01:42:21
B 192.56.20.0/24 [200/0] via 58.58.58.58, 01:42:21
B 192.56.30.0/24 [200/0] via 58.58.58.58, 01:42:21
B 192.56.40.0/24 [200/0] via 58.58.58.58, 01:42:21
B 192.58.10.0/24 [200/0] via 58.58.58.58, 01:42:40
B 192.58.20.0/24 [200/0] via 58.58.58.58, 01:42:40
B 192.58.30.0/24 [200/0] via 58.58.58.58, 01:42:40
B 192.58.40.0/24 [200/0] via 58.58.58.58, 01:42:40
B 192.59.10.0/24 [200/0] via 58.58.58.58, 01:42:40
B 192.59.20.0/24 [200/0] via 58.58.58.58, 01:42:40
B 192.59.30.0/24 [200/0] via 58.58.58.58, 01:42:40
B 192.59.40.0/24 [200/0] via 58.58.58.58, 01:42:40

R61 source

R61#sh ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
a - application route
+ - replicated route, % - next hop override, p - overrides from PfR

Gateway of last resort is not set

10.0.0.0/8 is variably subnetted, 7 subnets, 2 masks
O 10.10.48.0/24 [110/20] via 10.10.61.1, 01:45:28, Ethernet0/0
B 10.10.49.0/24 [200/0] via 48.48.48.48, 01:44:36
O 10.10.52.0/24 [110/40] via 10.10.61.1, 01:45:18, Ethernet0/0
B 10.10.54.0/24 [200/0] via 48.48.48.48, 01:44:16
O 10.10.60.0/24 [110/30] via 10.10.61.1, 01:45:28, Ethernet0/0
C 10.10.61.0/24 is directly connected, Ethernet0/0
L 10.10.61.2/32 is directly connected, Ethernet0/0
48.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
B 48.48.48.0/24 [200/0] via 48.48.48.48, 00:56:07
O 48.48.48.48/32 [110/11] via 10.10.61.1, 01:45:48, Ethernet0/0
49.0.0.0/24 is subnetted, 1 subnets
B 49.49.49.0 [200/0] via 48.48.48.48, 00:54:35
52.0.0.0/32 is subnetted, 1 subnets
O 52.52.52.52 [110/31] via 10.10.61.1, 01:45:18, Ethernet0/0
60.0.0.0/32 is subnetted, 1 subnets
O 60.60.60.60 [110/21] via 10.10.61.1, 01:45:28, Ethernet0/0
61.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C 61.61.61.0/24 is directly connected, Loopback0
L 61.61.61.61/32 is directly connected, Loopback0
172.16.0.0/16 is variably subnetted, 5 subnets, 2 masks
B 172.16.1.0/24 [200/0] via 52.52.52.52, 01:44:36
B 172.16.2.0/24 [200/0] via 48.48.48.48, 01:44:36
B 172.16.3.0/24 [200/0] via 52.52.52.52, 01:44:36
C 172.16.85.0/24 is directly connected, Ethernet0/2
L 172.16.85.2/32 is directly connected, Ethernet0/2
B 192.48.10.0/24 [200/0] via 48.48.48.48, 01:44:36
B 192.48.20.0/24 [200/0] via 48.48.48.48, 01:44:36
B 192.48.30.0/24 [200/0] via 48.48.48.48, 01:44:36
B 192.48.40.0/24 [200/0] via 48.48.48.48, 01:44:36
B 192.49.10.0/24 [200/0] via 48.48.48.48, 01:44:36
B 192.49.20.0/24 [200/0] via 48.48.48.48, 01:44:36
B 192.49.30.0/24 [200/0] via 48.48.48.48, 01:44:36
B 192.49.40.0/24 [200/0] via 48.48.48.48, 01:44:36
B 192.50.10.0/24 [200/0] via 52.52.52.52, 01:44:23
B 192.50.20.0/24 [200/0] via 52.52.52.52, 01:44:23
B 192.50.30.0/24 [200/0] via 52.52.52.52, 01:44:23
B 192.50.40.0/24 [200/0] via 52.52.52.52, 01:44:23
B 192.52.10.0/24 [200/0] via 52.52.52.52, 01:44:36
B 192.52.20.0/24 [200/0] via 52.52.52.52, 01:44:36
B 192.52.30.0/24 [200/0] via 52.52.52.52, 01:44:36
B 192.52.40.0/24 [200/0] via 52.52.52.52, 01:44:36
B 192.53.10.0/24 [200/0] via 52.52.52.52, 01:44:23
B 192.53.20.0/24 [200/0] via 52.52.52.52, 01:44:23
B 192.53.30.0/24 [200/0] via 52.52.52.52, 01:44:23
B 192.53.40.0/24 [200/0] via 52.52.52.52, 01:44:23
B 192.54.10.0/24 [200/0] via 48.48.48.48, 01:44:16
B 192.54.20.0/24 [200/0] via 48.48.48.48, 01:44:16
B 192.54.30.0/24 [200/0] via 48.48.48.48, 01:44:16
B 192.54.40.0/24 [200/0] via 48.48.48.48, 01:44:16
B 192.55.10.0/24 [200/0] via 52.52.52.52, 01:44:23
B 192.55.20.0/24 [200/0] via 52.52.52.52, 01:44:23
B 192.55.30.0/24 [200/0] via 52.52.52.52, 01:44:23
B 192.55.40.0/24 [200/0] via 52.52.52.52, 01:44:23
B 192.56.10.0/24 [200/0] via 52.52.52.52, 01:44:36
B 192.56.20.0/24 [200/0] via 52.52.52.52, 01:44:36
B 192.56.30.0/24 [200/0] via 52.52.52.52, 01:44:36
B 192.56.40.0/24 [200/0] via 52.52.52.52, 01:44:36
B 192.58.10.0/24 [200/0] via 48.48.48.48, 01:44:36
B 192.58.20.0/24 [200/0] via 48.48.48.48, 01:44:36
B 192.58.30.0/24 [200/0] via 48.48.48.48, 01:44:36
B 192.58.40.0/24 [200/0] via 48.48.48.48, 01:44:36
B 192.59.10.0/24 [200/0] via 52.52.52.52, 01:44:36
B 192.59.20.0/24 [200/0] via 52.52.52.52, 01:44:36
B 192.59.30.0/24 [200/0] via 52.52.52.52, 01:44:36
B 192.59.40.0/24 [200/0] via 52.52.52.52, 01:44:36
B 192.60.10.0/24 [200/0] via 60.60.60.60, 01:44:36
B 192.60.20.0/24 [200/0] via 60.60.60.60, 01:44:36
B 192.60.30.0/24 [200/0] via 60.60.60.60, 01:44:36
B 192.60.40.0/24 [200/0] via 60.60.60.60, 01:44:36
192.61.10.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.61.10.0/24 is directly connected, Loopback1
L 192.61.10.1/32 is directly connected, Loopback1
192.61.20.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.61.20.0/24 is directly connected, Loopback2
L 192.61.20.2/32 is directly connected, Loopback2
192.61.30.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.61.30.0/24 is directly connected, Loopback3
L 192.61.30.3/32 is directly connected, Loopback3
192.61.40.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.61.40.0/24 is directly connected, Loopback4
L 192.61.40.4/32 is directly connected, Loopback4
B 192.168.50.0/24 [200/0] via 60.60.60.60, 01:44:36
R61#

if the Lo only use to as BGP update source then no need 
do traceroute with source and find where the packet is stop.
 

its taking path R60 not reaching to R49

 

R61#traceroute 192.53.10.1
Type escape sequence to abort.
Tracing the route to 192.53.10.1
VRF info: (vrf in name/id, vrf out name/id)
1 10.10.61.1 1 msec 1 msec 1 msec
2 10.10.48.2 1 msec 2 msec 2 msec
3 10.10.60.2 2 msec 3 msec 2 msec
4 * * *
5 * * *
6 * * *
7 *

and that why the connection failed go to 10.10.60.2 and check the path to destination go to which router and check that router is the prefix is in RIB or not.

Hi @MHM Cisco World ,

The traceroute breaks on R56 because the source address was not specified and R56 has not idea how to reach 10.10.61.2, which is the source address used by R61 by default.

Regards,

Harold Ritter
Sr Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México

Hi @R Manjunatha ,

It is normal that traceroute it is not going to R49, but rather to R60, as the BGP path being learnt for 192.53.10.0/24 on R61 is via R52:

*>i 192.53.10.0 52.52.52.52 0 100 0 65003 65001 i

 

The reason for that is that R53 only advertises its local route to R54 and R58, which explains why the only path available in AS65002 is via AS65003. You are missing the following configuration on R53:

router bgp 65001

neighbor 49.49.49.49 remote-as 65001

neighbor 49.49.49.49 update-source Loopback0

Also, it would be a good idea to specify the source address when performing a traceroute or ping, as by default R61 will use 10.10.61.2, which is not propagated in BGP. For instance, this causes the traceroute you provided to break on R56, which has no idea how to get to 10.10.61.2. The source address you specify should be from a prefix propagated via BGP.

Regards,

 

Harold Ritter
Sr Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México

Thanks, Harold

I got it. I have one question.

Is there any best practice that without using source address while ping or traceroute, if I advertise local interface 

using ping or tracroute without source can be with only one step 
redistribute the prefix learn from BGP into IGP in each AS. 
this make all router know all prefix. 

Yes...

but I believe that is not a good idea in a production network.

OK, I will ask you something, why we need iBGP inside AS (except iBGP of edge router interconnect )??

It’s intended to provide coherent internal connections within an autonomous system while external BGP (eBGP) forms connections between autonomous systems.

we can run OSPF (or EIGRP) within AS and use redistribution between BGP and OSPF.  but what if had a full internet routing table?  5000 prefixes . IGPs like OSPF or EIGRP are not able to handle that many prefixes so you’ll need BGP for this.

full internet is end in Edge router, 
inside your AS you need only default route. 

I am talking about the SP Core.
but any way I will make small lab show you how you can deal with reachability.

Review Cisco Networking for a $25 gift card