11-15-2012
06:02 AM
- last edited on
03-25-2019
03:37 PM
by
ciscomoderator
Exampe:
show ip bgp vpnv4 vrf "vrf-name" sum | i 1234
10.244.11.14 4 1234 6934899 6290661 164944 0 0 41w1d 0
10.244.12.14 4 1234 7080720 6290660 164944 0 0 41w1d 0
10.244.13.14 4 1234 7731806 6290758 164944 0 0 41w1d 43
10.244.14.14 4 1234 7195156 6290775 164944 0 0 41w1d 33
10.244.15.14 4 1234 6993135 6290663 164944 0 0 1w2d 0
10.244.16.14 4 1234 7008760 6290663 164944 0 0 1w2d 0
10.244.17.14 4 1234 7122383 6290672 164944 0 0 1w2d 2792
show ip bgp vpnv4 vrf "vrf-name" 192.168.2.100 255.255.255.255
BGP routing table entry for 65000:500:192.168.2.100/32, version 164944
Paths: (8 available, best #1, table "vrf-name")
Not advertised to any peer
1234 65000
10.244.17.14 from 10.244.17.14 (10.254.254.121)
Origin incomplete, localpref 100, valid, external, best
Extended Community: RT:65000:500
1234 65000, (received-only)
10.244.17.14 from 10.244.17.14 (10.254.254.121)
Origin incomplete, localpref 100, valid, external
1234 65000 65000 65000, (received-only)
10.244.16.14 from 10.244.16.14 (10.254.254.121)
Origin incomplete, localpref 100, valid, external
1234 65000 65000 65000, (received-only)
10.244.15.14 from 10.244.15.14 (10.254.254.121)
Origin incomplete, localpref 100, valid, external
1234 65000 65000 65000, (received-only)
10.244.14.14 from 10.244.14.14 (10.254.254.121)
Origin incomplete, localpref 100, valid, external
1234 65000 65000 65000, (received-only)
10.244.11.14 from 10.244.11.14 (10.254.254.121)
Origin incomplete, localpref 100, valid, external
1234 65000, (received-only)
10.244.13.14 from 10.244.13.14 (10.254.254.121)
Origin incomplete, localpref 100, valid, external
1234 65000, (received-only)
10.244.12.14 from 10.244.12.14 (10.254.254.121)
Origin incomplete, localpref 100, valid, external
Question: why i get two entries about 192.168.2.100/32 subnetwork from the same neighbor 10.244.17.14 ?
"vrf-name" - it's local routing table using for local purposes only, no iBGP neighbors.
11-15-2012 06:47 AM
You are seeing this becasue of soft-reconfig
(received-only) is raw data from peer before applying any policy
The other entry ( best path) shows how this raw data was modified by the policy applied on the router
Thanks
Raju
11-15-2012 09:29 PM
Thanks !
11-15-2012 09:41 PM
You are welocme
Raju
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide