cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Bookmark
|
Subscribe
|
1505
Views
0
Helpful
0
Replies

Building Cisco 2811 Based ITP Solution

muaz.farooq
Level 1
Level 1

Hi All,

I am designing a SIGTRAN-to-SS7 relay solution based on Cisco 2811 ITP solution. Actually I'll only be needing ITP to convert my SIGTRAN messages in to Legacy SS7 and forward to next signaling entity and vice versa. I need ITP to do only following things,

1. Convert SIGTRAN to Legacy SS7 and vice versa.
2. Relaying on M3UA/MTP3 layer.

As per my understanding I've designed a cisco hardware+software solution described below. Please confirm if I've chosen the right components for my solution and it'll do the job.

ProductDescription
CISCO28112811 w/ AC PWR,2FE,4HWICs,2PVDMs,1NME,2AIMS,IPBASE,128F/512D
S28SGK9-12415SWCisco 2800 Series IOS IP TRANSFER POINT (M3UA/SUA)
VWIC-2T1/E1-RAN2-Port RJ-48 T1/E1 Protection Switching RAN/ITP/SLT WIC
FL-ITP-2800-LSLX4ITP 2800 4 SS7/C7 link license
FL-ITP-M3UA/SUACisco ITP M3UA/SUA license
CAB-ACUAC Power Cord (UK), C13, BS 1363, 2.5m
MEM2811-256U512D256 to 512MB DDR DRAM factory upgrade for the Cisco 2811
PWR-2811-ACCisco 2811 AC power supply
CCP-EXPRESSCisco Config Pro Express on Router Flash
MEM2800-64U128CF64 to 128 MB CF Factory Upgrade for Cisco 2800 Series
ACS-2811-STANCisco 2811 Standard Accessory Kit
CON-SMBS-2811ACIPSMBS 8x5xNBD Cisco2811 w/ AC PWR


Waiting eagerly for the feedback.

Regards
Muaz

0 Replies 0