I want to start by noting that I am thoroughly confused at this point and cannot figure out where I am going wrong.
Have been struggling with a connectivity issue following a recent power surge from a storm. A BVI from Cisco Catalyst 3600 cannot communicate with our local network.
We have several satellite connections which connect to us via ADSL. From these satellite offices I can talk to the Cisco 3600 we have here at our central office (BVI 10.60.112.1). There is a connection from the ATM port on the Cisco 3600 which goes to an ATM port on a Cisco Catalyst 8510 and there is an Ethernet connection from that 8510 to the core switch on our local network (Catalyst 6509).
Since I can talk to the 3600 without issue, I believe that the issue is the 8510 config.
Any assistance that anyone can provided would mean the world to me -- I figured this is the best place for a "second set of eyes".
There are only two ports in use on the 8510.
- The ATM port on the 3600 is connected to the 8510's ATM0/0/1.
- The 8510's ATM1/0/0 (622MM) is connected to our local network's core.
There is activity on both ports of the 8510, but from the local network I cannot see 10.60.112.1 and from the 3600 I cannot see the core.
The 8510 config looks pretty default, like some things were "lost" during the surge (we had backups of the 3600 and not the 8510).
The config goes as follows for the 8500:
!
version 12.1
no service single-slot-reload-enable
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname 8500
!
username all
sdm ipqos zero
sdm policy 0
ip subnet-zero
!
atm address 47.0091.8100.0000.0004.dd25.a201.0004.dd25.a201.00
atm router pnni
no aesa embedded-number left-justified
node 1 level 56 lowest
redistribute atm-static
!
!
interface ATM0/0/0
no ip address
no atm ilmi-keepalive
!
interface ATM0/0/1
no ip address
no atm ilmi-keepalive
!
interface ATM0/0/2
no ip address
!
interface ATM0/0/3
no ip address
!
interface ATM0/1/0
no ip address
shutdown
lbo short 133
no ima-group
!
interface ATM0/1/1
no ip address
shutdown
lbo short 133
no ima-group
!
interface ATM0/1/2
no ip address
shutdown
lbo short 133
no ima-group
!
interface ATM0/1/3
no ip address
shutdown
lbo short 133
no ima-group
!
interface ATM0/1/4
no ip address
shutdown
lbo short 133
!
interface ATM0/1/5
no ip address
shutdown
lbo short 133
no ima-group
!
interface ATM0/1/6
no ip address
shutdown
lbo short 133
no ima-group
!
interface ATM0/1/7
no ip address
shutdown
lbo short 133
no ima-group
!
interface ATM1/0/0
no ip address
sonet ais-shut
sonet threshold sf-ber 4
!
interface ATM1/1/0
no ip address
sonet ais-shut
sonet threshold sf-ber 4
!
interface ATM0
no ip address
!
interface Ethernet0
no ip address
!
interface ATM3/0/0
no ip address
sonet ais-shut
sonet threshold sf-ber 4
!
interface ATM3/1/0
no ip address
sonet ais-shut
sonet threshold sf-ber 4
!
interface ATM4/0/0
no ip address
sonet ais-shut
sonet threshold sf-ber 4
!
interface ATM4/1/0
no ip address
sonet ais-shut
sonet threshold sf-ber 4
!
ip classless
no ip http server
!
!
line con 0
line aux 0
line vty 0 4
!
end
The 3600 config looks like the following:
!
version 12.2
service timestamps debug datetime msec localtime
service timestamps log datetime msec localtime
no service password-encryption
!
hostname chardsl
!
logging buffered 10000 debugging
enable secret xxxxxxxxxxx
enable password xxxxxxxx
!
username all
ip subnet-zero
!
!
no ip domain-lookup
!
call rsvp-sync
cns event-service server
!
!
!
!
!
!
bridge irb
!
!
interface ATM0/0
ip address 10.60.120.2 255.255.248.0
atm pvc 1 0 5 qsaal
atm pvc 2 0 16 ilmi
no atm ilmi-keepalive
lane config-atm-address 39.840F8001BDE3000014000199.008012341D73.00
lane client ethernet elan8
!
interface ATM0/0.1 multipoint
shutdown
!
interface ATM1/0
no ip address
atm vc-per-vp 256
no atm ilmi-keepalive
no scrambling-payload
!
interface ATM1/1
no ip address
atm vc-per-vp 256
no atm ilmi-keepalive
no scrambling-payload
!
interface ATM1/1.1 point-to-point
pvc 1/178
encapsulation aal5snap
!
bridge-group 1
!
interface ATM1/1.2 point-to-point
pvc 1/175
encapsulation aal5snap
!
bridge-group 1
!
interface ATM1/1.3 point-to-point
pvc 1/37
encapsulation aal5snap
!
bridge-group 1
!
interface ATM1/1.4 point-to-point
pvc 1/34
encapsulation aal5snap
!
bridge-group 1
!
interface ATM1/1.5 point-to-point
pvc 1/51
encapsulation aal5snap
!
bridge-group 1
!
interface ATM1/1.6 point-to-point
pvc 1/33
encapsulation aal5snap
!
bridge-group 1
!
interface ATM1/1.7 point-to-point
pvc 1/179
encapsulation aal5snap
!
bridge-group 1
!
interface ATM1/1.8 point-to-point
pvc 1/52
encapsulation aal5snap
!
bridge-group 1
!
interface ATM1/1.9 point-to-point
pvc 1/32
encapsulation aal5snap
!
bridge-group 1
!
interface ATM1/1.10 point-to-point
description "st-anthony"
pvc 1/36
encapsulation aal5snap
!
bridge-group 1
!
interface ATM1/2
no ip address
shutdown
atm vc-per-vp 256
no atm ilmi-keepalive
no scrambling-payload
!
interface ATM1/3
no ip address
shutdown
atm vc-per-vp 256
no atm ilmi-keepalive
no scrambling-payload
!
interface BVI1
ip address 10.60.112.1 255.255.248.0
clns mtu 1514
!
ip classless
ip route 0.0.0.0 0.0.0.0 ATM0/0
ip route 10.60.0.0 255.255.0.0 10.60.120.1
ip route 10.60.112.0 255.255.248.0 BVI1
no ip http server
!
access-list 101 deny ip any 10.155.0.0 0.0.255.255
access-list 101 deny ip any 10.156.0.0 0.0.255.255
access-list 101 deny ip any 10.157.0.0 0.0.255.255
access-list 101 deny ip any 10.158.0.0 0.0.255.255
access-list 101 deny ip any 10.159.0.0 0.0.255.255
access-list 101 deny ip any 10.160.0.0 0.0.255.255
access-list 101 deny ip any 10.161.0.0 0.0.255.255
access-list 101 deny ip any 10.162.0.0 0.0.255.255
access-list 101 deny ip any 10.163.0.0 0.0.255.255
access-list 101 deny ip any 10.164.0.0 0.0.255.255
access-list 101 deny ip any 10.165.0.0 0.0.255.255
access-list 101 deny ip any 10.166.0.0 0.0.255.255
access-list 101 deny ip any 10.167.0.0 0.0.255.255
access-list 101 deny ip any 10.168.0.0 0.0.255.255
access-list 101 deny ip any 10.169.0.0 0.0.255.255
access-list 101 deny ip any 10.170.0.0 0.0.255.255
access-list 101 deny ip any 10.171.0.0 0.0.255.255
access-list 101 deny ip any 10.172.0.0 0.0.255.255
access-list 101 deny ip any 10.173.0.0 0.0.255.255
access-list 101 deny ip any 10.174.0.0 0.0.255.255
access-list 101 permit ip any any
!
bridge 1 protocol ieee
bridge 1 route ip
!
dial-peer cor custom
!
line con 0
line aux 0
login
line vty 0 4
login
line vty 5 15
login
!
end
