cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
150
Views
0
Helpful
1
Replies

C1111-8P - WEBUI only monitoring dashboard no router config

michael122
Level 1
Level 1

Hi,

i have setup the WEBUI as suggest by the following link:

"https://www.cisco.com/c/en/us/td/docs/routers/access/isr1100/software/configuration/xe-17/isr1100-sw-config-xe-17/mgmt_interfaces.html"

I believe thats the correct approach given my software version (17.3.4a), however, apart from the monitoring dashboard, there is nothing i can do in the Web UI, i think there should be additional tabs for configuration/administration but they do not show up, i ve included a screenshot how it looks like. 

In its current form the Web UI is not of much use for me. Please help.

Best

Michael

1 Accepted Solution

Accepted Solutions

michael122
Level 1
Level 1

Hi, i have found a solution in post for a different router model, but also works for this one

"Please configure 30 lines for line vty in order to resolve this issue:

line vty 0 30

"

View solution in original post

1 Reply 1

michael122
Level 1
Level 1

Hi, i have found a solution in post for a different router model, but also works for this one

"Please configure 30 lines for line vty in order to resolve this issue:

line vty 0 30

"

Review Cisco Networking for a $25 gift card