C2960L-SM routing

johnchrapkowski · ‎11-29-2023

Anyone know why I can't select my other VLANs for this routing ( I have 3)? Also I don't see the routes when I run show ip route after adding them, applying and saving! What's up with that?

M02@rt37 · ‎11-30-2023

Hello @johnchrapkowski

C2960L-SM is a L2 Switch. No routing (L3) capabilities. What is the IOS image ?

Best regards
.ı|ı.ı|ı. If This Helps, Please Rate .ı|ı.ı|ı.

johnchrapkowski · ‎11-30-2023

I thought so as well, but the documentation seems to indicate it can support up to 200 routes

balaji.bandi · ‎11-30-2023

its been Long i have worked on Cat2K models - can you post show License - and what SDM template you have ?

EDIT :

as per the document you can create VLAN and SVI using GUI :

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960l/software/15-2_6_e/configuration_guide/b_2960L_SM_1_0_UG/b_2960L_chapter_01.html#id_91321

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

johnchrapkowski · ‎11-30-2023

Thank you, I thought this as well, but why would it have the GUI allow me to set these things? Also some documentation seems to indicate it can do limited routing.

This image is from the Cisco docs on my exact switch:

Here is the version info:
Thu Nov 30 2023 11:22:08 GMT-0600 (Central Standard Time)
===================================================================================
#show ver
Cisco IOS Software, C2960L Software (C2960L-UNIVERSALK9-M), Version 15.2(6)E2b, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Tue 20-Nov-18 21:04 by prod_rel_team

ROM: Bootstrap program is C2960L boot loader
BOOTLDR: C2960L Boot Loader (C2960L-HBOOT-M) Version 15.2(6r)E1, RELEASE SOFTWARE (fc1)

Switch uptime is 4 weeks, 2 minutes
System returned to ROM by power-on
System restarted at 17:39:34 UTC Thu Nov 2 2023
System image file is "flash:c2960l-universalk9-mz.152-6.E2b/c2960l-universalk9-mz.152-6.E2b.bin"
Last reload reason: power-on

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco WS-C2960L-SM-48TS (Marvell PJ4B (584) v7 (Rev 2)) processor (revision E0) with 524288K bytes of memory.

ammahend · ‎11-30-2023

As suggested this is an L2 switch, however you can try configuring command “ip routing” and then try show ip route.

-hope this helps-

johnchrapkowski · ‎11-30-2023

Unfortunately I cannot, I can run the command and thats how I see thats it's not applying the routes, but I cannot edit from the CLI. This is a 2906 L-SM which is ONLY GUI configurable. The config term command doesn't even exist in the CLI

MHM Cisco World · ‎11-30-2023

Why you use gui'

Use cli and try add other vlan then use it for static route

MHM

johnchrapkowski · ‎11-30-2023

This is C2960L-SM SM=smart manage, which is ONLY GUI (not so smart if you ask me)

MHM Cisco World · ‎11-30-2023

Even so

I think there is tab vlan you can add vlan anc it ip then you can use it in static route.

Now there is no vlan for static because you dont add vlan.

MHM

johnchrapkowski · ‎11-30-2023

I tried this (or I think I did). I create a new VLAN (3) and added the port that this new device is connected to on that vlan 3. I then added a route using interface to VLAN3 with next hop IP of the device (the device is a router by the way).