11-03-2010 04:56 AM - edited 03-04-2019 10:21 AM
Hi everyone.
I have 2 sites (central & remote) with a PBX on each site. Both PBXs are connected via ethernet to the LANs. I have configured dynamic QoS for the IP addresses of the PBXs on each site. The problem is that dynamic bandwidth needs 5 minutes to "give" the configured bandwidth. This means that my voice calls face some (voice) interruptions when the call is established. After a while (when the configured bandwidth is given by the QoS policy) the voice is great.
I was wondering if I can give some dedicated bandwidth for the PBXs (i.e. 50Kbps) and if they need more bandwidth, they could "ask" for more (i.e. 200Kbps).
Can someone help me on this?
Thank you.
11-03-2010 05:17 AM
Can you share the current setup to suggest some either improvement or new configuration to apply?
11-03-2010 05:40 AM
CENTRAL SITE
-----------------------
class-map match-all VoiceBW_cmap
match access-group name VoiceBW_list
!
policy-map VoiceBW_pmap
class VoiceBW_cmap
bandwidth 512
class class-default
fair-queue
!
interface serial0/0/0:0
description #### link to remote side ####
service-policy output VoiceBW_pmap
!
ip access-list extended VoiceBW_list
permit ip any host 192.168.0.90
permit ip host 192.168.0.90 any
REMOTE SITE
-----------------------
class-map match-all VoiceBW_cmap
match access-group name VoiceBW_list
!
policy-map VoiceBW_pmap
class VoiceBW_cmap
bandwidth 512
class class-default
fair-queue
!
interface serial0/0/0:1
description #### link to central site ####
service-policy output VoiceBW_pmap
!
ip access-list extended VoiceBW_list
permit ip any host 192.168.1.90
permit ip host 192.168.1.90 any
11-03-2010 07:03 AM
If you change the voice class to use the 'low latency queue' by using the priority command quality should improve.
policy-map VoiceBW_pmap
class VoiceBW_cmap
priority 512
class class-default
fair-queue
Chris
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide