Can't reach my second subnet

[sb_nick]

Hi,

For my study i need to design a small network with 2 different subnets that can communicate with eachother.

PC1 has the ip address: 10.38.192.5 255.255.192.0

PC2 has the ip address: 10.38.0.5 255.255.192.0

The routers are configured with RIPv2. 

Router0 has the ip: 11.1.1.1/18

Router1 has the ip: 12.1.1.1/18

Router2 has the ip: 13.1.1.1/18

Any idea why i can't reach pc2 when i send a ICMP request from pc1?

[balaji.bandi · Accepted solution]

what is the Gateway of each device :

PC1 has the ip address: 10.38.192.5 255.255.192.0

PC2 has the ip address: 10.38.0.5 255.255.192.0

Since we do not have configuration or configured on the device hard to say where it gone wrong ?

You IP address not part of RIPv2 network, so there may be (guessing )this network required to anounce respected router to propogate all over network.

Test :

PC 1 what is the gatway , are you able to Ping Gateway ( where is the Gateway reside ( in switch or Router) ?

Traceroute from PC1 to PC 2 IP see where it stop, that is best to start with.

[ddeoli88881545]

Your subnet is wrong
255.255.255.0
Please type this

[sb_nick]

PC1 has the 10.38.192.1 gateway. I am able to ping the gateway.

[Martin L]

Please  zip your PT file and attach it here.

Regards, ML
**Please Rate All Helpful Responses **

[sb_nick]

Here is my PT file. Thanks in advance.