cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1123
Views
0
Helpful
2
Replies

Can we make port channel between two line cards at the same switch?

wfqk
Level 5
Level 5

Hi For Switch 4500, can we make port channel between two line card at the same switch? Anyone can firm this? i know we cannot make the channel between different switch. Thanks

1 Accepted Solution

Accepted Solutions

Hello,

 

the short answer is: yes

 

--> All Ethernet interfaces on all modules support EtherChannel (maximum of eight interfaces) with no requirement that interfaces be physically contiguous or on the same module.

 

EtherChannel Configuration Guidelines and Restrictions

 

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/12-2/31sg/configuration/guide/conf/channel.html#wp1020420

View solution in original post

2 Replies 2

Hello,

 

the short answer is: yes

 

--> All Ethernet interfaces on all modules support EtherChannel (maximum of eight interfaces) with no requirement that interfaces be physically contiguous or on the same module.

 

EtherChannel Configuration Guidelines and Restrictions

 

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/12-2/31sg/configuration/guide/conf/channel.html#wp1020420

Thank you!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: