Hi all,
I am trying to assign bandwidth for two different clients using CBWFQ, I use a class map to call the address of each clients defined by an access-list.
MY OBJECTIVE IS TO ASSIGN 128KBPS FOR EACH CUSTOMER WITH LEAST CONFIG BECAUSE OF RESOURSES!
WHAT IS THE EFFECT OF EACH CONFIG, AND WHICH SERVE THE PURPOSE ?
....................................... A.................................
ip access-list standard CUSTOMER1
permit 10.0.0.1
ip access-list standard CUSTOMER2
permit 10.0.0.2
!
class-map match-any 128KBPS
match access-group name CUSTOMER1
match access-group name CUSTOMER2
!
policy-map CUSTOMERS
class 128KBPS
bandwidth 128
!
........................B.............................
ip access-list standard CUSTOMER
permit 10.0.0.1
permit 10.0.0.2
class-map match-any 128KBPS
match access-group name CUSTOMER
!
policy-map CUSTOMERS
class 128KBPS
bandwidth 128
....................................C..................................
ip access-list standard CUSTOMER1
permit 10.0.0.1
ip access-list standard CUSTOMER2
permit 10.0.0.2
!
class-map match-any CUSTOMER1
match access-group name CUSTOMER1
!
class-map match-any CUSTOMER2
match access-group name CUSTOMER2
!
policy-map CUSTOMERS
class CUSTOMER1
bandwidth 128
class CUSTOMER2
bandwidth 128