cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
414
Views
0
Helpful
1
Replies

CBWFQ question

ciscoforum
Level 1
Level 1

Following is quoted from Cisco QOS training material talking about CBWFQ.

It says "the bandwidth assigned to the packets of a class

determines the order in which packets are sent. " How come the bandwidth determines the order of the packets being sent?

Here is the quoted:

-----------------------------------------

For CBWFQ, the weight for a packet belonging to a specific class is derived from the bandwidth that you

assigned to the class when you configured it. Therefore, the bandwidth assigned to the packets of a class

determines the order in which packets are sent. All packets are serviced fairly based on weight.

1 Reply 1

jheckart
Level 3
Level 3

I think that you are reading to far into the material.

Using MQC, the packet must first be classified using class-maps. Then, using policy-maps, the previously defined class-maps are used to determine which queue the packet is assigned to.

I think that it should have said, "the weight of a packet is derived from the bandwidth specified within the priority-map based upon the classification within the class-map".

Is that the clarification that you were looking for?