07-13-2006 10:35 PM - last edited on 03-25-2019 03:13 PM by ciscomoderator
Hi,
I have 7200 router.
Can any one tell me that how can I check the ds3 link alarms on 7200 router.
I have minimum access on router.
Waiting for reply....
Solved! Go to Solution.
07-15-2006 02:51 PM
Here is a good doc that explains the main errors/alarms you can take on a DS3:
http://www.cisco.com/en/US/tech/tk39/tk48/technologies_tech_note09186a0080111093.shtml
Its written for ATM DS3 controllers, but most of it holds true for standard serial DS3.
07-14-2006 04:53 AM
PLS TRY
sh controllers e1
07-14-2006 12:34 PM
If it is a channelized DS3 card it will be
show controllers t3 slot/port
If it is clearchannel, it will be
show controllers serial slot/port
07-15-2006 01:55 AM
Thanks a lot...
I am able to check alarm on 7200 with command
sh controller serial slot/port.
10xs for reply
And its good if U can send me the types of alarms and there meanings.
07-15-2006 02:51 PM
Here is a good doc that explains the main errors/alarms you can take on a DS3:
http://www.cisco.com/en/US/tech/tk39/tk48/technologies_tech_note09186a0080111093.shtml
Its written for ATM DS3 controllers, but most of it holds true for standard serial DS3.
07-16-2006 08:26 PM
Hi,
Thanks for your reply.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide