CISCO 1252 on SGE2000P via PoE

[roadster51]

Hello,

it is possible to wide the range of powerconsumtion on this switch from 15.4W up to 20W?

We will rollout some accesspoints with 2 radiomodules on CISCO AP1252, but the Powerconsumtion of this AP then ist 18.5W.

The max allowed from firmware is 15.4W like 802.11n-standard.

Thanks

[Leo Laohoo]

it is possible to wide the range of powerconsumtion on this switch from 15.4W up to 20W?

Not possible, HOWEVER, if you upgrade the IOS of your 1250 AP to 12.4(10b)JDA3 or later the AP can operate with both radios operational with 15.4w of PoE (at a cost of lower MCS rates).

Please don't forget to rate our useful posts.  Thanks.