Routing

Hi Alli have been told by my service provider that the 877 adsl router has issues with some of their exchanges and for best compatability i should upgrade to the latest version of firmware.ADSL firmware of 4.0.18i have read on the internet that the f...

Hi all i have the following mappings in place but something is not right somewhere:ip nat inside source static tcp 196.201.230.18 2209 41.223.56.43 9000 extendable ip nat inside source static tcp 196.201.230.18 2210 41.223.56.44 9000 extendableip nat...

I hoping someone can give me some advise. I have a customer who is doing MLPPP on a cisco 1700 this terminates on a cisco 7200 on a CT3 single wide port card doing distributed multilink. The customer was complaining of "sluggish" performance and when...

Hello,wondering if someone could help. we have cisco sr520 adsl router at one of the sites. A  device is connected to the LAN and needs to be communicated directly to the server with 3rd party over internet. we have a static public IP( a.b.c.d) for c...

Hello,it is possible to wide the range of powerconsumtion on this switch from 15.4W up to 20W?We will rollout some accesspoints with 2 radiomodules on CISCO AP1252, but the Powerconsumtion of this AP then ist 18.5W.The max allowed from firmware is 15...

Hi,I am working on determine which model of router and RAM size which can handle the BGP routing table.  Did you have any experience how to do a judement. According Ram + CPU .... etc?Currently I planning to add manage 3 peering with full BGP table f...

Dear ALL,I recently configured PAT on core switch 6500. But after putting some PCs in inside VLAN facing problem of cpu utilization crossing above 50%. Here is the sh proc cpu outputI have attached nat translation log file. Kindly suggest how to miti...

Hi,I have one network setupRouter LAN 172.16.15.7Router WAN: 10.15.1.101Destination IP address 30.30.30.1Source IP address from Clients will be : 192.168.10.10I dont want 30.30.30.1 to be routed inside my LAN. I want to nat it into another IP address...

Here's what i have...                 Gi0/1                     Serial0/0ISP1-----------------------Router AAA------------------ISP2                               |             |                    Gi0/0   |             | Gi0/2                       ...

Hi,When performing a mtrace on our devices, we always get these two lines within the trace. Can anyone tell me what this means?x.x.x.xx.x.x.xx.x.x.x 0.0.0.0 None Admin. Prohibited !RPF!10.1.x.x [default]0.0.0.0 PIM  [x.x.0.0/16]x.x.x.xx.x.x.xThanks,D...

Hi all,i need help with Policy based routing.    The branch router has two connections via GRE tunnel to HQ. all routers in question using EIGRP. I want all finance server traffic to use one of the connections to HQ and all other traffic to use the o...