Greetings,
I have run into an issue with the Cisco 1921 Fiber Router.
Background:
The Cisco 1921 is located at Small Company incubator facility, the 1921 has a fiber line coming in from the provider. The 1921 has multiple static IP Addresses assigned to it.
We are connecting a Cisco/ Meraki MX-60 firewall to the 1921, cable from 1921 is plugged into the Internet connection port on the MX-60.
One of the static IP addresses is assigned to the Meraki MX-60.
The MX-60 can connect to the Internet, a check of the IP address shows the correct static IP address
Problems:
When ports are opened and assigned on the Meraki MX-60, the ports are no open on the Internet, for instance port 3389 was opened and then assigned to an IP address for a PC connected to the Meraki. Tried to remote in from the Internet could not.
Scan of open ports on the static IP address show no ports open.
Question:
Does anybody know of hand if there is something that would be blocking the ports on the Cisco 1921.
I don't have access to the 1921, I would need to call the provider , provider indicates all ports are open.
Notes:
We orginaly tried a Cisco SA520w Firwall with same results above.
Thanks
Justin
