cisco 1941 Security License

[Arielstu1]

Hi

As far as i read, need the  SL-19-SEC-K9  for  security License,  what about resources needed for IPS active  in terms of memory or another module ?

Is there some GUI to administrate the IPS ?

Thanks

[handoko wiyanto]

hi,

just did a quick read here:

http://www.cisco.com/en/US/prod/collateral/routers/ps5853/ps5875/product_data_sheet0900aecd806c4e2a_ps2641_Products_Data_Sheet.html

it turns out that 1941 cant use IPS AIM or IPS NME

are you refering to Cisco IOS IPS?

http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6634/product_data_sheet0900aecd803137cf.html

if yes, then you only need to purchase the security feature license like you mention.

regards,

[Arielstu1]

Yes i refer to  Cisco IOS IPS

but when i go to the configurator into Cisco site and pick Cisco 1900 series

then i expand the option Feature License, i don't see any thing refering to IPS

see the below screen  is the   C1941-WAASX/K9

Thanks

[handoko wiyanto]

hi,

please refer to some text below:

• A single Cisco IOS®  Software Universal image is installed on each ISR G2. The Universal  image contains all of the Cisco IOS technology sets which can be  activated with a software license. This allows your business to quickly  deploy advanced features without downloading a new IOS image.  Additionally, larger default memory is included to support the new  capabilities.

taken from 1941 datasheet.

regards,