cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1473
Views
0
Helpful
2
Replies

Cisco 2811 can't see HWIC-1CE1T1-PRI

steve.kerr
Level 1
Level 1

Hi, I have a HWIC-1CE1T1-PRI in a Cisco 2811 running IOS c2800nm-advipservicesk9-mz.124-18b.bin.

When I enter the "card type E1 0 0" command (it is in WIC 0 slot) I get the following response:

SYINDEV01RW02(config)#card type e1 1 0

^

% Invalid input detected at '^' marker.

Also the show inventory or show hardware commands do not appear to show this card at all.

Am I missing something here or does this look like the card is faulty?

2 Replies 2

Jon Marshall
Hall of Fame
Hall of Fame

Steve

You need a minimum IOS of 12.4(20)T for this card, see Table 2 of the following doc -

https://www.cisco.com/en/US/prod/collateral/modules/ps2797/product_data_sheet0900aecd80710c88_ps5949_Products_Data_Sheet.html

so you need to upgrade your IOS.

Jon