Cisco 2821 3 Wic

[jangydb98]

Hello,

I have a Cisco 2821 with 3 wic, 2 wic adsl and 1 wic eth. I need to configure the two adsl wics in load balancing and failover and in case of all the two adsl don't work, all the traffic must be routed on the eth wic wan.

The IOS version is 12.4

Can You help me? 

Thanks

Salve,
ho un router Cisco 2821 con 3 interfacce wic, di cui due adsl e una wan. Avrei la necessità di far lavorare le due wic adsl in load balancing e fail over e, in caso nessuna delle due linee funzioni, il traffico esca sulla wan eth.
C'è qualcuno che mi può dare la configurazione?

La versione dell'os è la 12.4.

Grazie

[Georg Pauwen]

Hello,

what caused the system to crash ? Did you do anything specific ? Post the output of 'show version', looks like you are either facing a hardware or a software induced crash.

[jangydb98]

Hello,

I just applied the configuration you gave me, but I still have the same problem.

The interface go up but, when the traffic go up the router hang and reboot.

In the attachment you find the output of "show version" command as you ask me.

Thanks

[jangydb98]

Hi,

The config Working but one server (Win srv 2012) on the lan have problem to download files from a FTP server, and other PCs work with ftp

Can You help me?

Thanks