cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1688
Views
0
Helpful
5
Replies

CISCO 2921 ROUTER WITH LOUD NOISE

benojefua
Level 1
Level 1

I have a 2921 router which has suddenly started making a loud noise. I assume this is from the fans. The system LED light is also amber. Any ideas what might be causing this and ways to resolve?

Thanks.

1 Accepted Solution

Accepted Solutions


@benojefua wrote:
Sep 25 2020 03:17:24.568 CAT: %MAINBOARD-3-I2CRW_ERROR: Read failure - Device @ 0x30, offset 0x00000001 on I2C bus 0

Contact Cisco TAC and organize for an RMA.  

The sound you hear is the sound of the motherboard "frying" and the above logs prove it.

View solution in original post

5 Replies 5

Leo Laohoo
Hall of Fame
Hall of Fame

What does the logs say?

Please see below what i have from the logs.

018988: Sep 25 2020 03:17:19.552 CAT: %IP_SNMP-4-NOTRAPIP: SNMP trap source GigabitEthernet0/0 has no ip address
018989: Sep 25 2020 03:17:24.568 CAT: %MAINBOARD-3-I2CRW_ERROR: Read failure - Device @ 0x30, offset 0x00000001 on I2C bus 0
018990: Sep 25 2020 03:17:24.568 CAT: %MAINBOARD-3-I2CRW_ERROR: Read failure - Device @ 0x30, offset 0x00000002 on I2C bus 0
018991: Sep 25 2020 03:17:29.584 CAT: %MAINBOARD-3-I2CRW_ERROR: Read failure - Device @ 0x30, offset 0x00000002 on I2C bus 0

 

  https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvd35848/?rfs=iqvred

  (possibly)

  

  M.

  



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '


@benojefua wrote:
Sep 25 2020 03:17:24.568 CAT: %MAINBOARD-3-I2CRW_ERROR: Read failure - Device @ 0x30, offset 0x00000001 on I2C bus 0

Contact Cisco TAC and organize for an RMA.  

The sound you hear is the sound of the motherboard "frying" and the above logs prove it.

Thanks

Review Cisco Networking for a $25 gift card