I need help on determining whether the Cisco 3560x platform is capable of supporting DLSw and whether additional licenses are required to enable this feature. I will be running the IP services software image and be using DLSw to carry IBM SNA traffic across an MPLS network. I have tried using the Cisco feature navigator but I cannot see the 3560 in the list of platforms. Any help would be appreciated as I am struggling to find any supporting documentation.
I did find the 3560 in the Feature Navigator (you need to look for CAT3560 and not just 3560). I do not find any mention of support for DLSW on this platform. I do find support for DLSW on several of the ISR router platforms but not for any of the Catalyst switches. If you need to support DLSW then you may need to look into a router as the solution.
Cisco Digital Network Architecture Center Modules(Design Module)Part.2In this article, we are going to talk about the Cisco Digital Network Architecture Center design Module. Cisco DNA Center gives us the flexibility and availability to con...
Connectivity Design considerations and recommendation
1.Management Access connectivity
If there is a dedicated OOB management path, consider connecting to CIMC and MGMT port.
If OOB path is not available, Connect the dedicated Management port to LAN Swi...
Cisco Digital Network Architecture Center Modules In this article, we are going to talk about Cisco Digital Network Architecture Center design Module. Cisco DNA Center gives us the flexibility and scalability to configure multiple fabric sites a...
This document provides an overview of DPDK and steps to configure and troubleshoot DPDK for OVS in NFVIS.
DPDK stands for Data Plane Development Kit, is a set of libraries that improves data plane performance.DPDK description