cisco 4331 ISR

[mellalBrahim]

hey,

acually i am going to deploy i new cisco ISR 4331, this last should support 4 Link point to point with 512 ko as bandwidth, so i'll insert two NIM-2T catres.

is that possible without any issue ?? does the router support those links normally ??

thanks in advance.

[Leo Laohoo]

1. Is the router running SD-WAN or autonomous mode?
2. What is the exact firmware version of the router?
3. What licenses are enabled?
4. What bandwidth is enabled?

[mellalBrahim]

- autonomous model
- version : 16.09.04
- license : securityk9 , ipbasek9
- primary link 2 mbps , secondary 512 kbps.


Thanks

[Leo Laohoo]

---

@mellalBrahim wrote:
- version : 16.09.04

---

Please read FN - 72323 - Cisco IOS XE Software: QuoVadis Root CA 2 Decommission Might Affect Smart Licensing, Smart Call Home, and Other Functionality.

I strongly recommend doing the WORKAROUND or upgrade to the latest 16.9.X.  DO NOT, under any circumstances, upgrade to 16.10.X and later. 

[mellalBrahim]

Hey,


What about the version, 17.03.02 ??

[Leo Laohoo]

Post the complete output to the following commands: 

sh license feature
sh platform hardware throughput level 

[mellalBrahim]

hey,

the sh license feature is unknowing ,

 

 

[Leo Laohoo]

---

@mellalBrahim wrote:

What about the version, 17.03.02 ??

---

Upgrade to the latest 16.9.X. 

DO NOT, under any circumstances, upgrade to 16.10.X and later. 
DO NOT, under any circumstances, upgrade to 17.X.X and later. 

NOTE:  The router is licensed for 100 kbps Mbps only.

[mellalBrahim]

So to use 512 kbps link or up we should buy a new licence ??

[Leo Laohoo]

---

@mellalBrahim wrote:
So to use 512 kbps link or up we should buy a new licence ??

---

Wait.  My eyes are deceiving me. 

The router is licensed for 100 Mbps.

[mellalBrahim]

so everything whould be good once i downgrade to the lastest 16.9.x version ??

many thinks @Leo Laohoo 

[Leo Laohoo · Accepted solution]

Yes.

[mellalBrahim]

many thanks leo.