Cisco 7600 Series SPA Interface Processor-600 compatibility

[Alan Boyd]

Quick question: does the Cisco 7600 Series SPA Interface Processor-600 (7600-SIP-600-DC) only support a single SPA, e.g.

1 x SPA-OC192POS-XFP?

The 10Gbps through put on the 7600-SIP-600-DC and http://www.cisco.com/en/US/prod/collateral/routers/ps368/product_data_sheet0900aecd8033998f_ps708_Products_Data_Sheet.html appears to show that this is the case.

Thanks

[Giuseppe Larosa · Accepted solution]

Hello Alan,

with 10Gbps BW capabilities it would not be wise to install two

1 x SPA-OC192POS-XFP SPA on the SIP 600

to be noted table-1 of the document you have linked says:

Modularity

One SPA per Cisco 7600 SIP 600 module

It may be possible to install two SPAs to have a cold standby, but only one SPA should be used.

Hope to help

Giuseppe

[Alan Boyd]

Thanks! Appreciated.

Alan