Re: Cisco 803 IOS or mss command on it.

muneer_bom3 · ‎01-02-2006

Hi All,

on cisco 803 router (VPN CONNECTIVITY) i am not able to access remote locations Exchange server apart from this other application like SAP, FTP, etc working fine only OWA is not working.

checked and found that we have to configure mss to 1430 but this command is not there on ciso 803, I have to upgrade the ISO of the same, which i am not able to found on any site.

please post the link or is there anyway to configure the mss in cisco 803.

Thanx in advance

Regards

Muneer

spremkumar · ‎01-02-2006

Hi

Can you revert what kinda VPN you have deployed over there between ur locations ?

also are you trying out this command ip tcp adjust-mss to tweak the mss ?

Also can you paste the show version o/p of your router over here..

regds

muneer_bom3 · ‎01-02-2006

thanx for replying

Wireless VPN from sify. from my head office to branch office.

yes i am trying adjust-mss on cisco 803 router which is not there, mtu also tried but dint get any any success.

Cisco Internetwork Operating System Software

IOS (tm) C800 Software (C800-Y6-MW), Version 12.1(7), RELEASE SOFTWARE (fc1)

Compiled Thu 22-Feb-01 11:47 by kellythw

Image text-base: 0x000EA000, data-base: 0x00617000

ROM: TinyROM version 1.4(1)

Glenmark_Sanpada uptime is 5 days, 1 hour, 37 minutes

System returned to ROM by power-on

System image file is "flash:c800-y6-mw.121-71"

Cisco C803 (MPC850) processor (revision 1) with 43364K bytes of virtual memory

Processor board ID JAD06020CJS

CPU part number 0x2101

Bridging software.

Basic Rate ISDN software, Version 1.1.

2 POTS Ports

1 Ethernet/IEEE 802.3 interface(s)

1 ISDN Basic Rate interface(s)

4M bytes of physical memory (DRAM)

8K bytes of non-volatile configuration memory

8M bytes of flash on board (4M from flash card)

Configuration register is 0x2102

Best Regards

Muneer Ahmed

spremkumar · ‎01-03-2006

hi

As per the data sheets available this feature was introduced in 12.2(4)T ,command migration from ip adjust-mss to ip tcp adjust-mss happened in 12.2(8)T.

upgrade the ios code to 12.2 GD version to have the command configured under ur interface...

regds

muneer_bom3 · ‎01-03-2006

Thnak YOu

please can me post the link of the same. pleease

Pleeeeeeassseee

Regards

Muneer

mheusinger · ‎01-03-2006

Hi,

you need a CCO account to download IOS software from

http://www.cisco.com/public/sw-center/products.shtml

Providing you an IOS without you being entitled to get it would be a copyright violation.

Hope this helps

Martin

spremkumar · ‎01-03-2006

Hi

heres the link which talks about the tcp-adjust command support ..

http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide09186a00804247fc.html

You can very well download the reqd ios code from the link mentioned by Martin..

regds