09-20-2006 05:57 AM - edited 03-03-2019 02:03 PM
Which ios version will fit in to get adsl work properly facing a Lucent card ?
Or what option do I need to add in the config? I have already tried dsl operating mode ansi-dmt !!!
Thanks in advance.
09-20-2006 06:19 AM
Hi,
This is a sample config which is a working config.
interface ATM0/0
no ip address
no atm ilmi-keepalive
pvc 8/35
pppoe-client dial-pool-number 1
!
dsl operating-mode auto
!
!
interface Dialer1
mtu 1200
ip address negotiated
no ip redirects
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap callin
ppp chap hostname gmaccom
ppp chap password 7 1049041806141D065D
Please, paste your existing config, and we can help you to fix the same.
Kind Regards,
Wilson Samuel
09-20-2006 07:11 AM
Here is my sample config.But remember my card
connected in the co is Lucent ... not Alcatel.
ios bin file is c870-advipservicesk9-mz.124-4.T1.bin
interface ATM0
mtu 1490
no ip address
no ip redirects
no ip proxy-arp
no ip route-cache cef
no ip route-cache
no ip mroute-cache
no atm ilmi-keepalive
bundle-enable
dsl operating-mode auto
hold-queue 224 in
!
interface ATM0.1 point-to-point
no ip route-cache
no ip mroute-cache
pvc 0/35
pppoe-client dial-pool-number 1
!
interface Dialer1
mtu 1490
ip address negotiated
no ip redirects
no ip unreachables
ip virtual-reassembly
encapsulation ppp
no ip route-cache cef
no ip route-cache
no ip mroute-cache
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication pap callin
ppp pap sent-username xxxxxx password xxxxx
!
Thanks for your help.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide