CISCO 880 Series

[Charlesjoseph]

Hi Cisco,

This is Charles

Can you please advise how to login to the router & Port forwarding (NAT) "CISCO 880 Series"

[Mark Malone]

if its just standard static NAT take a look at this guide it explains how to configure it

http://www.firewall.cx/networking-topics/network-address-translation-nat/229-nat-static-part-1.html

logging into the router its by ssh/telnet through ip address in putty or by console access direct to router over putty/hyper terminal

https://www.youtube.com/watch?v=7sM4f1_QloQ

[chrissnop]

In addition to Mark's reply please check links below:

Login to console using Putty (you need to have the console cable)

http://www.omnisecu.com/cisco-certified-network-associate-ccna/how-to-use-putty-to-configure-or-monitor-a-cisco-router-or-switch.php

https://supportforums.cisco.com/discussion/11786016/ios-port-forwarding-commands-port-forwarding