Hello,
I have tried to update the 881w with new IOS from c800-universalk9_npe-mz.SPA.154-3.M3.
The new IOS fails to load, also I have changed the c800-universalk9_npe-mz.SPA.154-3.M3 file name.
Now, ISR is in rommon mode and I can't change the neither file name nor I cant load a new ios image. The SET parameter doesn't have IP_ADDRESS or any other way to set up IP for TFTP or XMODEM upload.
Are there any rommon parameters to change so I can load either from TFTP or change in rommon the file name?
THX
Steve
