07-23-2013 06:27 AM - edited 03-04-2019 08:31 PM
Good morning,
while configuring a CISCO-888-EA-K9, I encountered the following problem:
Router(config)#router bgp 65000
Protocol not in this image
The router is originally equipped with the image: c800-universalk9-mz.SPA.152-4.M3.bin
I tried also: c800-universalk9-mz.SPA.153-2.T.bin
without results.
I would appreciate any cooperation in resolving this issue.
Cordially
Solved! Go to Solution.
07-23-2013 07:12 AM
What license does the router have? I suspect this will be a licensing rather than IOS issue. You'll need the advanced IP services license for the router for BGP to work.
07-23-2013 07:22 AM
Hi,
you'll need 15.3(2)T or higher with the Advanced IP services.
Regards
Alain
Don't forget to rate helpful posts.
07-23-2013 07:33 AM
I checked the Cisco Feature Navigator and it agrees that for the 888 you need the Advanced IP Services license.
HTH
Rick
07-23-2013 07:12 AM
What license does the router have? I suspect this will be a licensing rather than IOS issue. You'll need the advanced IP services license for the router for BGP to work.
07-23-2013 07:22 AM
Hi,
you'll need 15.3(2)T or higher with the Advanced IP services.
Regards
Alain
Don't forget to rate helpful posts.
07-23-2013 07:33 AM
I checked the Cisco Feature Navigator and it agrees that for the 888 you need the Advanced IP Services license.
HTH
Rick
07-23-2013 08:05 AM
I thank you all for providing such a fast response.
I'll contact my Cisco account for the license needed..
Greetings
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide