Routing

Hi everyone. I've set up my home network with two connections to my ISP. They both seem to terminate on the same BRAS, hence using the interface for the route as opposed to the next hop for the route, along with the fact they've given me /32 addresse...

Hello.I have to CE routers connected via two PEs and MPLS. MP-BGP session is established. Routes are exchanged and CE also has all needed routes. But no ping and traceroute((( I have checked LSP, LIB,LFIB, CEF. Everything is ok. But still no responce...

Hi,I am wondering if it is possible to bundle links that are configured for fabric path.  If yes, could you please provide a link to documentation as I have not found any yet.Thanks

I am having an issue setting up a new sites ASA, the VPN tunnel comes up but i just cant ping anything across it. I have done the usual checks, nat rules etc but just cant see the problem. I have even wiped the ASA and copied the config from a workin...

Hello all,I have a very weird issue concerning PAT.I have an ASA5505 with ASA8.2(2) running. The outside interface is on "dhcp setroute" mode and receives an IP address from our ISP. The inside interface is connected to a switch with desktops connect...

Hello Community,Can someone please tell me if its possible to prevent the repeated log message in Nexus 5K and simply show the actual log.2013 Jun 27 21:20:58 MX-N5K1 last message repeated 4 times2013 Jun 27 21:26:31 MX-N5K1 last message repeated 4 t...

I have a Cisco 2600 that is acting as DR on an Ethernet LAN with one other router on that network.  It will happily become adjacent with the other router and they share their link databases.  I can cause further LS updates to the 2600 and they are in...

Hi AllI have two links from two different ISP terminating on two differnt routers.I have one Checkpoin R55 software based firewall on Windows setupBoth routers and Checkpoint R55 are connected using Cisco switchEach ISP has given me /28 and /29 subne...

I have just bought my first non-domestic router, a CISCO 887VA-K9 which needs basic configuration to get it working.  I have a copy of the configuration guide (334 pages) and CP Express user's guide (94 pages) and have spent an hour reading but eithe...

A Cisco Partner has asked me'We have a growing customer that we have previously used 2x stacked Catalyst 2960S to give us 8 SFP ports for Fibre + switching All their new installs require a minimum of 10 SFP ports for the amount of fibre being deploye...