Cisco and Zoneedit

[ikhan]

Hello,

Any one got experience with Cisco 3620 routers doing automatic updates of ip addresses with zoneedit?

I hav a non-static ip address and want the router to do an update when the ipaddress on the interface changes.

Any help would be much appreciiated.

Thanks

Ikhan

[b.hsu]

Specify the DynDNS.org to process the updates with Zone-edit.It could be done with the help of the following command

PASSWORD@www.zoneedit.com/auth/dynamic.html?host')">http://USERNAME:PASSWORD@www.zoneedit.com/auth/dynamic.html?host=&dnsto=.Refer the following URL

http://www.cisco.com/en/US/products/ps6350/products_command_reference_chapter09186a00804461ba.html

[redowk123]

I was able to make it work with  IOS 15.

As far as i tested it doesnt work with IOS 12.4. Same  exact config with IOS 15 and it works.

**** IOS 15 its very buggy, there is  another way, using "ip sla" command, i was able to make it work with  "freedns.afraid.org", witch too offers free dns/ddns services with  custom top level domains.

You can check it out here:

http://www.tiagomarques.info/2010/11/tuturial-cisco-ddns-e-freedns-afraid-org/

Note: Its  in Portuguese, **** everyone should figure out the important stuff.