Welcome to the Cisco Community Ask Me Anything EventWe invite you to participate in our upcoming Ask Me Anything (AMA) conversation. Please submit your questions from Thursday, September 3, 2026, through Wednesday, September 30, 2026. Our experts Eri...
Forum Posts
Hi Everyone,I am facing a severe QoS shaping issue on a Cisco NCS 540 router running IOS XR Version 24.3.2.Network Scenario:Core Router: Cisco NCS 540Customer Edge: MikroTik RouterConnectivity: Sub-interfaces / VLANs (TenGigE0/0/0/17.xxx)The Problem:...
Hello Guys,We are planning to upgrade Cisco router Cisco C8300-1N1S-4T2X from XE image 17.6.5 (Rommon image 17.3(5r)) to latest XE image 17.9.5a. As per Rommon compatibility matrix, this new XE image should have minimum rommon image of 17.3(1r) and m...
Hello, everyoneThis is my last question regarding inter-AS MPLS before I can wrap this topic up.This is my topology, I am using Option B:R4-XR and R5 peer via VPNv4. If we look at this from R4-XR's perspective, I understand that the next-hop can be d...
Hello, everyoneThis is my topology:R4-XR and R5 are configured for a VPNv4 peering between their loopbacks (4.4.4.4 and 5.5.5.5)RP/0/RP0/CPU0:R4-XR(config-bgp-nbr)#do show run router static Thu Sep 17 13:48:29.930 UTC router static address-family ipv...
I didn't see this posted yet but was wondering if anyone else is having issues editing WAN interfaces from the dashboard? We have a case started with them, and they say it's a known issue, but the workaround isn't practical for remote support. Hopefu...
Hello CIsco champ , i trying to findout command to filter route with specific Route-target i.e. RT in bgp vpn4 for customer vrf in ASR 1000 ..i tried multiple command from google , cisco doucment and AI ..but still not found way to filter route ..can...
Hello, everyone.I have this topology:R3-RR and R6-XR-RR peer via BGP VPNv4. In order for this to happen, I must advertise their loopbacks via the IPv4 eBGP session between my two ASBRs -> R4-XR and R5. I then redistribute these routes into OSPF.The w...
Hi Team,Could someone confirm whether there is a known or ongoing bug in Version 17.12.8 related to NAT functionality?We are experiencing NAT issues where the NAT table shows 0 entries when the problem occurs. The temporary workaround is to reboot th...
Resolved! vedge cloud - qcow2
Hello, I have my sdwan lab, and I just download the vedge cloud (qcow2) I would like to know how I can add them to my vmange with a self certificate? Thanks. !
Hi everyone,I’m facing a recurring issue with some Cisco SD-WAN routers. Occasionally, a router suddenly becomes unreachable from the SD-WAN controller, even though the physical interfaces and connectivity appear to be up. The device may still show a...
Hi everyone,I'm looking for some advice on the best way to consolidate my devices and licenses.The Scenario: I manage 3 different clients, and all of their networks were originally grouped under a single Meraki Organization. Recently, I purchased a n...
Hello, everyoneThis is my topology:I am configuring MPLS Inter-AS Option C. I've configured everything apart from send-label on the ASBR routers. I also haven't configured R6-XR (the RR in AS 1235 to not change the next hop) so it is basically settin...
Recently, I've been looking for a job as a fresher, but not getting any. It's really tough to get a job nowadays in India as a fresher. So, I thought why not just keep learning that's why I am here today. I would like to know some good resources to g...
Hi, i'm would like to achieve zero touch, standalone c8000v router in Azure, using Terraform and Day 0 provisioning via Custom Data property. I am following this document: https://www.cisco.com/c/en/us/td/docs/routers/C8000V/Configuration/c8000v-inst...
We have just upgraded the Control Components (vManage, vSmart and vBond) to version 20.18.4. Everything just works fine - no issues at all. But, now we would like to update our cEdge devices to version 17.18.04.0.759. After the upgrading the first on...
