hey guys, have a problem here.
cisco asa has a config for dual uplink check.
show sla monitor configuration
SA Agent, Infrastructure Engine-II
Entry number: 123
Owner:
Tag:
Type of operation to perform: echo
Target address: 24.29.99.35
Interface: outside
Number of packets: 3
Request size (ARR data portion): 28
Operation timeout (milliseconds): 5000
Type Of Service parameters: 0x0
Verify data: No
Operation frequency (seconds): 10
Next Scheduled Start Time: Start Time already passed
Group Scheduled : FALSE
Life (seconds): Forever
Entry Ageout (seconds): never
Recurring (Starting Everyday): FALSE
Status of entry (SNMP RowStatus): Active
Enhanced History:
Entry number: 123
Modification time: 10:27:10.796 UTC Wed Jun 29 2011
Number of Octets Used by this Entry: 1480
Number of operations attempted: 258464
Number of operations skipped: 0
Current seconds left in Life: Forever
Operational state of entry: Active
Last time this entry was reset: Never
Connection loss occurred: FALSE
Timeout occurred: FALSE
Over thresholds occurred: FALSE
Latest RTT (milliseconds): 10
Latest operation start time: 08:24:20.798 UTC Fri Jul 29 2011
Latest operation return code: OK
RTT Values:
RTTAvg: 10 RTTMin: 10 RTTMax: 10
NumOfRTT: 3 RTTSum: 30 RTTSum2: 300
every time i ran show run, it get stuck for a while with messages
Stats busy
Stats busy
Stats busy
Stats busy
any idea what the heck is this?
thanks
