cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
598
Views
0
Helpful
2
Replies

Cisco ASR 9000 series known problem.

RAGHU N
Level 1
Level 1

Dear All,

   We have so many ASRs running @ Aggregation level.I have noticed that few of TE interfaces reliability is varying and so their Sub interfaces too.

SR-9001-VPE#sh interfaces Te0/0/2/1

Mon Jan 13 14:34:20.309 IST

TenGigE0/0/2/1 is up, line protocol is up

  Interface state transitions: 1

  Hardware is TenGigE, address is 10f3.1148.2779 (bia 10f3.1148.2779)

  Layer 1 Transport Mode is LAN

  Internet address is Unknown

  MTU 9198 bytes, BW 10000000 Kbit (Max: 10000000 Kbit)

     reliability 254/255, txload 2/255, rxload 2/255

while consulting with my senior team, they mentioned like, its happens in all ASR.

is this an IOS issue, or anything like default behaviour for ASRs ?

Kindly help me.

Thanks & Regards,

Ram.

2 Replies 2

_networker_
Level 1
Level 1

Can you describe in more detail the exact Problem? Has the internet address changed from an configured address to unknown?

Exact problrm is Reliability.is gettiing low around 250 sometimes.

interfaces Te0/0/2/1 is the Main interface. With sub interfaces .L2VPN service. Issue is Reliability. I would like to know any such common issue for ASRs.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card