09-25-2015 01:47 PM - edited 03-05-2019 02:23 AM
Hi,
Have a Cisco C3KX-NM-10G Catalyst 3K-X 10G Network Module. How long do you think it would take for the 3750X Series Catalyst Switch to recognize the new module?
Is it hot swappable?
Can 1GB SFP transceivers work fine in this?
Thanks!!
09-25-2015 03:36 PM
Replying to my own message here...
Was able to replace the module HOT but having trouble with a single 10G connection in slot #4. Might be another issue but thought you should know.
09-30-2015 07:23 AM
Hello Elvis
Try this link and use this flavors:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/hardware/install/notes/net_mod_note.html
•Slot 2 with one 10-Gigabit SFP+ module and Slots 3 and 4 with 1-Gigabit SFP modules
•Slot 2 and Slot 4 each with 10-Gigabit SFP+ modules
Let me know how it goes.
Good luck!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide