Cisco C3KX-NM-10G Catalyst 3K-X 10G Network Module swap

[chocolate.elvis1]

Hi,

Have a Cisco C3KX-NM-10G Catalyst 3K-X 10G Network Module. How long do you think it would take for the 3750X Series Catalyst Switch to recognize the new module?

Is it hot swappable?

Can 1GB SFP transceivers work fine in this?

Thanks!!

[chocolate.elvis1]

Replying to my own message here...

Was able to replace the module HOT but having trouble with a single 10G connection in slot #4. Might be another issue but thought you should know.

[Hector Fregoso]

Hello Elvis

Try this link and use this flavors:

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/hardware/install/notes/net_mod_note.html

•Slot 2 with one 10-Gigabit SFP+ module and Slots 3 and 4 with 1-Gigabit SFP modules

•Slot 2 and Slot 4 each with 10-Gigabit SFP+ modules

Let me know how it goes.

Good luck!