Cisco ISR C1111-8P/4P – VLAN Interface and Port-Channel support?

[PN100]

I am preparing to deploy the Cisco ISR C1111-8P and 4P (ISR 1100 Series – 8 Ports Dual GE WAN Ethernet Router).

I have a few questions and would really appreciate your advice:

• Is it possible to configure Interface VLAN (SVI) on the ISR C1111-8P/4P?
• Does this router support Port-Channel (EtherChannel / LACP) on its LAN interfaces?
• For anyone who has already deployed or is currently managing the ISR C1111, could you please log in and share the output of “interface vlan” and “etherchannel” related commands on this router?

Any additional tips or experiences with this model would be very helpful.

Thank you in advance!

[MHM Cisco World]

Check command available in your router 

Use 

Interface?

See what options you have 

For PO L3 yes it support in ISR 1K

MHM

[PN100]

I am currently preparing to deploy the ISR C1111, but I don’t have the router on hand yet to test the commands myself.

[MHM Cisco World]

https://www.cisco.com/c/en/us/td/docs/routers/access/1100/software/configuration/xe-16-7/cisco_1100_series_swcfg_xe_16_7_x.html

Check all config you need in this guide 

MHM

[PN100]

I have read through Cisco’s guide, but to be sure, I would like to ask if anyone who has deployed or is currently managing this model could log in and check whether it supports configuring interface VLAN and port-channel.