Cisco ( MPLS /VPN ) Routing Problem ?

[mohdsaad1]

Dear Cisco Experts,

Before off all study the attached diagram carefully and running Configuration

I need to Ping interface ( GE0/0 on router ISDN ) and Ping Server 1 and server 2
Note :  From Laptop I can ping only interface (GE0/1 on Dialup router )
Servers Have 2 Ethernet cards

Thanks

[gatlin007]

Good documentation.

Are there any static routes on the servers?  A 'netstat -r' should reveal them.

It appears the ISDN router is the default gateway for the servers.  The ISDN server has a route for your laptop (192.168.6.0/24) over BRI1/5; shouldn't this be via GE0/0 with a next hop of 192.168.0.253 (Dialup router)?


Chris