ā12-17-2015 01:22 AM - edited ā03-05-2019 02:57 AM
ASW1_C6509(config)#router bgp XXXXXX
ASW1_C6509(config-router)#address-family ipv4 multicast vrf IPTV1
% BGP: Error initializing topology
ASW1_C6509#sh vrf IPTV1
Name Default RD Protocols Interfaces
IPTV1 100:110 ipv4 Vl110
h run int vlan 110
Building configuration...
Current configuration : 113 bytes
!
interface Vlan110
ip vrf forwarding IPTV1
ip address xx.zz.240.106 255.255.255.252
ip pim sparse-mode
end
Cisco IOS Software, s72033_rp Software (s72033_rp-ADVENTERPRISEK9-M), Version 15.1(2)SY4a, RELEASE SOFTWARE (fc1)
ā12-17-2015 06:33 AM
Hello,
Are you trying to implement mVPN solution. I dont think address-family ipv4 multicast vrf <> is supported in this release. It might be supported on 15.2 release.
Though i tried myself on 15.5(3)M and its supported in that release.
Hope this answers your question.
Please let me know if you have any other query.
Regards
VInit
ā12-17-2015 06:58 AM
For cisco 6500 family I cannot find IOS == 15.2
Some fresh release is s72033-advipservicesk9-mz.151-2.SY6.bin
https://software.cisco.com/download/release.html?mdfid=280829702&softwareid=280805680&release=15.1.2-SY5&flowid=20138
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide