hi,
i got a NCS 540 and would like to know if i could use the 10G SFP/transceiver to the 25 GE ports?
similar to a 10G SFP could be used by a 1G port. does the same logic apply for 25 GE > 10G.
NAME: "TenGigE0/0/0/7", DESCR: "Non-Cisco SFP+ 10G SR Pluggable Optics Module"
PID: SFP-10G-SR-C , VID: A , SN: ATG20aaa
NAME: "TenGigE0/0/0/8", DESCR: "Cisco SFP+ 10G SR Pluggable Optics Module"
PID: SFP-10G-SR , VID: V03, SN: JUR18bbb
NAME: "TenGigE0/0/0/9", DESCR: "Cisco SFP+ 10G SR Pluggable Optics Module"
PID: SFP-10G-SR , VID: V03, SN: JUR19ccc
NAME: "TenGigE0/0/0/15", DESCR: "Non-Cisco SFP+ 10G LR Pluggable Optics Module"
PID: SFP-10G-LR-C , VID: B , SN: AT41ddd
TwentyFiveGigE0/0/0/24 unassigned Shutdown Down default
TwentyFiveGigE0/0/0/25 unassigned Shutdown Down default
TwentyFiveGigE0/0/0/26 unassigned Shutdown Down default
TwentyFiveGigE0/0/0/27 unassigned Shutdown Down default
TwentyFiveGigE0/0/0/28 unassigned Shutdown Down default
TwentyFiveGigE0/0/0/29 unassigned Shutdown Down default
TwentyFiveGigE0/0/0/30 unassigned Shutdown Down default
TwentyFiveGigE0/0/0/31 unassigned Shutdown Down default
