cisco router 3925 create xconnect on sub port-channel

[unfraget]

hi everybody

i have router 3925 with IOS version c3900-universalk9-mz.SPA.156-3.M4.bin

Technology Package License Information for Module:'c3900'

------------------------------------------------------------------------
Technology    Technology-package                  Technology-package
              Current              Type           Next reboot
------------------------------------------------------------------------
ipbase        ipbasek9             Permanent      ipbasek9
security      None                 None           None
uc            uck9                 Permanent      uck9
data          datak9               Permanent      datak9

and i'm trying create xconnect on sub port channel interfacem, but i can't do it, under sub interface configuration mode absent context xconnect:

(config)#int po1.100
(config-subif)#en
(config-subif)#encapsulation do
(config-subif)#encapsulation dot1Q 100
(config-subif)#x
(config-subif)#x?
% Unrecognized command

how to create xconnect on sub port-channel?
 

[Georg Pauwen]

Hello,

is the data license (which I think is required for xconnect) active and in use ?

3925#show license

should show something like this:

Index 4 Feature: datak9
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium

[unfraget]

Hello 

yes, data licence is active 

#sh license
Index 1 Feature: ipbasek9
        Period left: Life time
        License Type: Permanent
        License State: Active, In Use
        License Count: Non-Counted
        License Priority: Medium
Index 2 Feature: securityk9
        Period left: Not Activated
        Period Used: 0  minute  0  second
        License Type: EvalRightToUse
        License State: Active, Not in Use, EULA not accepted
        License Count: Non-Counted
        License Priority: None
Index 3 Feature: uck9
        Period left: Life time
        License Type: Permanent
        License State: Active, In Use
        License Count: Non-Counted
        License Priority: Medium
Index 4 Feature: datak9
        Period left: Life time
        License Type: Permanent
        License State: Active, In Use
        License Count: Non-Counted
        License Priority: Medium

[Giuseppe Larosa]

Hello unfraget,

you have the correct licenses installed and active.

I have a question :

the member links of po100 are taken from router ports of the C3925 or are switched ports of an etherswitch module installed on the C3925?

I think this can make the difference between support and lack of support.

Hope to help

Giuseppe

[unfraget]

Hi!
my CISCO3925 hasn't an additional module, all port is embedded

[paul driver]

Hello

Looks like ios version incompatibility problem

[unfraget]

Hello 

which version is needed?