08-11-2019 11:44 PM - edited 08-11-2019 11:45 PM
hi everybody
i have router 3925 with IOS version c3900-universalk9-mz.SPA.156-3.M4.bin
Technology Package License Information for Module:'c3900' ------------------------------------------------------------------------ Technology Technology-package Technology-package Current Type Next reboot ------------------------------------------------------------------------ ipbase ipbasek9 Permanent ipbasek9 security None None None uc uck9 Permanent uck9 data datak9 Permanent datak9
and i'm trying create xconnect on sub port channel interfacem, but i can't do it, under sub interface configuration mode absent context xconnect:
(config)#int po1.100 (config-subif)#en (config-subif)#encapsulation do (config-subif)#encapsulation dot1Q 100 (config-subif)#x (config-subif)#x? % Unrecognized command
how to create xconnect on sub port-channel?
08-12-2019 01:16 AM
Hello,
is the data license (which I think is required for xconnect) active and in use ?
3925#show license
should show something like this:
Index 4 Feature: datak9
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
08-13-2019 01:20 AM
Hello
yes, data licence is active
#sh license Index 1 Feature: ipbasek9 Period left: Life time License Type: Permanent License State: Active, In Use License Count: Non-Counted License Priority: Medium Index 2 Feature: securityk9 Period left: Not Activated Period Used: 0 minute 0 second License Type: EvalRightToUse License State: Active, Not in Use, EULA not accepted License Count: Non-Counted License Priority: None Index 3 Feature: uck9 Period left: Life time License Type: Permanent License State: Active, In Use License Count: Non-Counted License Priority: Medium Index 4 Feature: datak9 Period left: Life time License Type: Permanent License State: Active, In Use License Count: Non-Counted License Priority: Medium
08-13-2019 02:33 AM - edited 08-13-2019 02:35 AM
Hello unfraget,
you have the correct licenses installed and active.
I have a question :
the member links of po100 are taken from router ports of the C3925 or are switched ports of an etherswitch module installed on the C3925?
I think this can make the difference between support and lack of support.
Hope to help
Giuseppe
08-13-2019 06:09 AM
08-12-2019 01:51 AM
Hello
Looks like ios version incompatibility problem
08-13-2019 01:22 AM
Hello
which version is needed?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide