cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
397
Views
0
Helpful
2
Replies

Cisco router 800 series configuration

junaid haroon
Level 1
Level 1

Hi,

I have router 800 series.I has only one ethernet interface.I need one ethernet inface for WAN and one for LAN. Can i achive this by dividing the one interface into multiple subinterfaces.

I need one interface for Dailer configuration for WAN connectivity.And one for LAN.

Please advise.

2 Replies 2

Giuseppe Larosa
Hall of Fame
Hall of Fame

Hello Junaid,

with the appropriate IOS image there is support of the PPPoX over a vlan based subinterface. However, you will need an external L2 LAN switch that supports Vlans and 802.1Q vlan tagging.

What exact model is your router?

What IOS image is running on it?

You can post  show version output that contains both requested informations

Hope to help

Giuseppe

Hi Giuseppe,

Below is result of sh version command.


Cisco IOS Software, C837 Software (C837-K9O3Y6-M), Version 12.3(7)T, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2004 by Cisco Systems, Inc.

Compiled Sat 21-Feb-04 14:37 by eaarmas

ROM: System Bootstrap, Version 12.2(8r)YN, RELEASE SOFTWARE (fc1)

Router uptime is 8 minutes

System returned to ROM by power-on

System image file is "flash:c837-k9o3y6-mz.123-7.T.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

Cisco C837 (MPC857DSL) processor (revision 0x500) with 44237K/4915K bytes of memory.

Processor board ID AMB08190LA6 (4135788765), with hardware revision 0000

CPU rev number 7

1 Ethernet interface

1 ATM interface

128K bytes of NVRAM.

12288K bytes of processor board System flash (Read/Write)

2048K bytes of processor board Web flash (Read/Write)

Configuration register is 0x2102

Review Cisco Networking for a $25 gift card