03-30-2009 07:56 AM - edited 03-04-2019 04:09 AM
I reseted the cisco router 800 series. All the configuration gone. May i know how to configure its ip back to 10.10.10.1? Thus, I can use SDM to configure the rest of settings.
I tried to configure its interface ip to 10.10.10.1 but it showed ip address may not be configured on L2 links.
Please kindly help.
03-30-2009 08:07 AM
You should be able to configure the address on interface BVI1.
HTH,
John
03-30-2009 08:10 AM
how to do it?
03-30-2009 08:17 AM
You would need to console into the device with your console cable. You can use hyperterminal or putty to connect to the device.
HTH,
John
03-30-2009 11:40 AM
What is the command?
03-30-2009 11:43 AM
The command for setting your ip address?
conf t
int bvi1
ip addr 10.10.10.1 255.255.255.0
Copy and paste the lines that are between
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide