09-29-2021 10:33 AM
Is there any way for the physical switch to trip like a breaker and shut the power down to this device? To my knowledge you can physically flip the switch from on to off or remotely power it down correct?
09-29-2021 11:06 PM
- No you can't
M.
09-30-2021 12:30 AM
Hello,
on a side note, Cisco indeed does not have an IOS command to power off or shutdown their devices. Juniper does:
request system poweroff --> stops the CPU but also sends an ACPI hardware signal which instructs the system to commence with a complete and immediate shutdown. This is roughly equivalent to pressing the power button on a typical desktop computer.
For Cisco, if you really need it, you would have to get a remote controlled power switch (such as the one depicted in the link below):
09-30-2021 04:11 AM - edited 09-30-2021 04:13 AM
Hello
You’ll need a PDU power management switch for this - which would provide remote power cycle/shutdown/restart of your network devices, I uesd them before and they are extremely useful.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: